INDUSTRY NINE REVIVE 2.0 CARBON SYSTEM WHEELSET

Testing, standards and warranty at Industry Nine

Industry Nine has anodized and machined hubs, spokes, and drive systems in Asheville, North Carolina since 2004. The company grew out of a family machine shop in the Blue Ridge and states that it engineers and manufactures every component of its hub and wheel systems in-house, including hub shells, axles, spokes, pawls, drive rings, and anodizing. Complete wheels are hand built to order and ship in approximately two weeks, fulfilled from Asheville, Kamloops, or Cadiz depending on location and inventory. In 2025 Industry Nine acquired We Are One Composites, which now operates as WR1, its carbon rim design program and manufacturer; WR1 has hand laid carbon rims under one roof in Kamloops, British Columbia since 2017.

Three hub platforms cover the range. Hydra2, the flagship mountain hub, was developed from feedback on more than 100,000 first-generation Hydra hubs and pairs a reinforced 145-tooth steel drive ring with six phased oversized pawl pockets for 870 points of engagement at 0.41 degrees. Industry Nine cites a 65 percent thicker axle, 5.5mm pawl pockets with 26 percent better force dissipation, 60 percent less coasting drag than the original Hydra, 6903 hub shell bearings, and full-contact radial lip seals with a labyrinth channel; it is rated for trail, enduro, downhill, e-bike, bikepacking, and dirt jump use. Solix, the gravel, road, and cross-country hub, uses a patented continuously phased freehub in which five pawls and a 121-tooth drive ring produce 605 points of engagement at 0.59 degrees. Its pawls and drive rings are cut from A2 tool steel by wire EDM, bearing spec is equalized front and rear, end caps carry full-contact seals behind a proximity dust and water shield, and preload is set by bore-diameter contraction. The 1/1 hub is the entry platform, with a dual-phase pawl drive giving 90 points of engagement at 4 degrees, high-capacity bearings, and a conventional flanged shell for J-bend Sapim steel spokes. Hydra2 and Solix are offered as System hubs, which take Industry Nine's direct-thread machined aluminum spokes, or as Classic hubs with scalloped flanges for J-bend steel spokes.

Convergence is the carbon rim technology shared by the Whisp, Sector, Triad, Deal, Fuse, Wanderer, and Revive 2.0 rims. Industry Nine says the program ran through 208 versions over two years before release. The rim's alternating spoke bed faces are angled at 7.5 degrees so that each nipple bed aligns with the hub flange, producing a linear spoke line and 360 degree contact between nipple and rim; articulation is listed as plus or minus 7.5 degrees for mountain rims and plus or minus 6 degrees for gravel and bikepacking rims, with a 4.3mm spoke hole. A ZRT composite film from Boston Materials, containing 13 billion Z-axis carbon fibers per square meter, is built into the spoke bed, and Industry Nine reports the rim is 32 percent stronger than its predecessor with tuned vertical compliance. Every Convergence rim is laid up by a named technician, assigned a serial number, and shipped without sanding, filling, or painting. On the road side, the R35, R50, and R65 carbon rims are described as CFD born and wind tunnel tested and among the fastest disc-specific rims available. Industry Nine characterizes its validation as in-house pressure testing in the same environments its riders use rather than published laboratory figures, and it does not list a rider weight limit on current product pages.

Warranty coverage is administered from Asheville for the United States and Canada. All Hydra2 and Solix hubs carry a Five-Year Limited Hub Warranty regardless of purchase date; for other products the current terms apply to purchases made on or after January 1, 2026. Hubs are covered against defects in materials and workmanship for five years, with parts, labor, and return shipping included in the first two years and parts only in years three through five; bearings and other wear items are excluded. Carbon rims are covered for the life of the original owner against defects and also against impact damage sustained while riding within the wheel's intended use, with a rim replacement or a factory rebuild offered when a claim qualifies. Alloy rims are covered for life against manufacturing defects, including split seams and cracks at spoke holes, with full parts, labor, and return shipping for the first two years; impact or crash damage on alloy rims is not a warranty item but may qualify for the Crash Replacement program. Aluminum System spokes are covered for confirmed manufacturing defects. Coverage applies to the original purchaser with proof of purchase from a certified Industry Nine dealer or distributor, and claims are filed through the Service and Warranty Request form on the company's website. Industry Nine also offers factory service on all products and states that no proprietary tools are required for routine hub service.

Industry Nine's videos

From Industry Nine

Warranty and certifications

• Five-Year Limited Hub Warranty — All Hydra2 and Solix hubs are covered for five years against defects in materials and workmanship regardless of purchase date; parts, labor, and return shipping in years one and two, parts only in years three through five; bearings and wear items excluded (source)
• Lifetime carbon rim warranty including riding impact — Convergence and R-series carbon rims are covered for the life of the original owner against defects and against impact damage sustained while riding within the wheel's intended use; rim replacement or factory rebuild offered on qualifying claims (source)
• Lifetime alloy rim defect coverage and Crash Replacement — Aluminum rims are covered for life against manufacturing defects such as split seams and spoke-hole cracks, with full parts, labor, and return shipping for the first two years; crash and impact damage is handled under the Crash Replacement program (source)
• CFD and wind tunnel validated R-series rims — The R35, R50, and R65 carbon road rims are described by Industry Nine as CFD born and wind tunnel tested and among the fastest disc-specific rims available (source)
• ZRT-reinforced Convergence spoke bed, 32 percent stronger — Boston Materials ZRT composite film with 13 billion Z-axis carbon fibers per square meter is built into the spoke bed; Industry Nine reports a 32 percent strength gain over the previous generation, with every rim hand laid by a named technician in Kamloops and serial numbered (source)
• Patented continuously phased freehub — Five pawls on a 121-tooth drive ring give the Solix hub 605 points of engagement at 0.59 degrees; Hydra2 uses six pawls and a 145-tooth ring for 870 points at 0.41 degrees; pawls and drive rings are wire-EDM cut from A2 tool steel (source)

Sources on Industry Nine's site:

• Industry Nine Warranty and Rider Support
• Choose Your Hub: Hydra2, SOLiX, and 1/1 platforms
• WR1 Convergence Carbon rim technology
• About Industry Nine: Two Brands, One Standard
• Industry Nine Solix Hubs
• Solix service documents and exploded views

The figures, certificates and media above are Industry Nine's own. ProWheelBuilder does not run these tests; we sell the wheel and stand behind the order.