A 49mm carbon road rear in 24 hole, listed at 415g.
- 24.8mm inner, 32.1mm outer, 49mm deep
- 1.8mm offset spoke bed, 24 hole, 29in
- Road and gravel tires get a rounder profile
- Disc brake, tubeless compatible, external nipples
Reserve 49 TA SL Rear Carbon Fiber Clincher Rim
The Reserve 49 TA SL Rear Carbon Fiber Clincher Rim is a 49mm-deep tubeless carbon disc rim with a 24.8mm inner width, sold for custom wheel builds. Reserve designs and manufactures it, and ProWheelBuilder, an independent wheel builder in Georgia, turns it into a complete wheel: you pick the hub, spokes, nipples and lacing in the configurator, and it ships laced, tensioned and trued by hand.
Specifications
| Wheel size | 29in |
|---|---|
| ERD | 542 (29in) |
| Inner width | 24.8 mm |
| Outer width | 32.1 mm |
| Depth | 49 mm |
| Drillings | 24h |
| Weight | 415g (700c/29in) |
| Material | Carbon Fiber |
| Tire type | clincher tubeless compatible |
| Brake | Disc |
| Spoke bed | Offset 1.8 mm |
| Nipples | External |
| Finishes | black |
Material and weight
A carbon fiber rim, listed by Reserve at 415g in 700c/29in. Rim weight is rotating weight at the outside of the wheel, so it is felt more than the same grams on the frame. A 24.8mm inner width suits road and gravel tires that want a rounder profile.
Value
In a wheel we build, its spokes are cut to the measured ERD of the 29in size, then it is laced to your hub, tensioned and trued by hand, and we stand behind the finished wheel. The configurator always shows the current price for each size.
How we build it
Pick the wheel size (29in), then a drilling (24h), and the configurator only offers hubs, spokes and lacing patterns that can be built with that combination. Sizes or drillings not made are struck through rather than hidden. Start from this rim in the Custom Wheel Program, or send us a rim you already own with the supply-your-own option.
Warranty
Reserve's warranty. Reserve, made by Santa Cruz Bicycles, covers its rims for the lifetime of the rim to the original owner: a rim broken while riding is replaced, and damage from a non-riding incident is covered by a low-cost crash-replacement program.
ProWheelBuilder. Built into a wheel by us, this part is covered by our own one-year wheel warranty on top of the maker's. For a year we replace broken spokes whatever caused them, and we cover the labor on the wheel - truing, re-tensioning, a rebuild if it needs one. If a rim or hub fails and its maker covers it, we run that claim for you; if the maker says no, you get an eligible replacement rim or hub at 25% off retail. You pay the shipping each way. Wheels built from parts you send us are excluded.
Full terms are on our Policies & Warranty page.
49 TA SL Rear Carbon Fiber Clincher Rim questions
Is ProWheelBuilder the manufacturer of the Reserve 49 TA SL Rear Carbon Fiber Clincher Rim?
No. Reserve makes the rim. ProWheelBuilder is an independent custom wheel builder in Georgia: we buy the rim from Reserve and build it into a finished wheel to your spec.
Is it tubeless-ready?
Yes. Reserve lists the 49 TA SL Rear Carbon Fiber Clincher Rim as clincher tubeless compatible; we tape and fit a valve when you choose the tubeless option.
Which spoke count should I choose?
It depends on your weight, terrain and the hub, not the rim alone. The configurator recommends a count from your bike type and rider weight, within the drillings this rim is made in.
How long will the wheel take?
Build time comes down to parts availability rather than bench time. The estimated ship date is shown in the configurator before you check out.
Not sure? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929 — you will be talking to the people who build the wheels.
