There are no products listed under this category.
Ibis Wheels with Onyx Hubs
Custom Ibis Wheels on Onyx Hubs
Pick an Ibis rim we carry, put it on an Onyx hub, and we lace and true the wheel by hand in our Georgia shop.
Why build Ibis rims on Onyx hubs:
- Made by specialists: Onyx hubs machined in Minnesota
- Proven: Ibis builds a hollow box-section bead wall to stop pinch flats; Onyx drives through a sprag clutch, with no teeth to skip
- Built to last: Onyx hubs coast silently, with no pawls to wear; Ibis gives the original owner a lifetime warranty on its rims
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Blackbird Send 2 mountain
Build your custom Ibis wheel on Onyx hubs for:
Or start from the Onyx hub you want:
Vesper Centerlock→Vesper 6-bolt→MTB Centerlock→MTB 6-bolt→Fat Bike Centerlock→Fat Bike 6-bolt→MTB SS Centerlock, rear only→MTB SS 6-bolt, rear only→MTB Lefty 6-bolt, front only→Vesper SS Centerlock, rear only→Vesper SS 6-bolt, rear only→
Or pick one of the 2 ready-made pairs below: each opens our custom wheel builder with the Ibis rim and Onyx hub already chosen.
Mountain in depth
Ibis Blackbird Send 2 wheels on Onyx Vesper Centerlock hubs
Our mountain pick from the Ibis and Onyx parts we build with. The Ibis Blackbird Send 2 is a hooked aluminum rim, 35mm inside, 17mm deep, about 625 grams in 29 inch, sized for about 2.4 to 2.8 inch tires. We lace it to Onyx Vesper Centerlock hubs in 32 hole.
- Ribs under the bead seat on the Send 2. A dented bead wall can be bent back, but Ibis says a dented bead seat can't, and then the tire will not seal tubeless. The Send 2 adds a pair of ribs right beneath the seat to prevent that, for about 45 grams per rim.
- Standard spokes and rotor mounts. For all the unusual drive, these are J-bend hubs that take standard J-bend spokes, the easiest kind to find anywhere. Vesper and MTB disc models come in Centerlock and 6-bolt.
Start building this pair:
Mountain Bike
Ibis rims on Onyx hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Onyx hub our customers choose most with that rim. The builder offers every Onyx hub that fits, and you choose the colors, spokes and the rest.
More about Ibis and Onyx wheels
Why the pairing, specs and FAQ
Custom hand built Ibis wheels on Onyx hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What Ibis rims and Onyx hubs each bring
- A hollow box-section bead wall. Pinch flats happen when a hard hit traps the tire against the rim edge. Ibis removes the sharp edge with a hollow box-section bead wall that gives the tire a broad contact point, and it says the wall is stronger with no added weight.
- Ribs under the bead seat on the Send 2. A dented bead wall can be bent back, but Ibis says a dented bead seat can't, and then the tire will not seal tubeless. The Send 2 adds a pair of ribs right beneath the seat to prevent that, for about 45 grams per rim.
- A front and rear pairing. The rear wheel takes the brunt of the damage, so Ibis's own wheelsets put a Send 1 up front and a Send 2 in back.
- A patented sprag clutch instead of pawls. Onyx hubs drive through a sprag clutch, not pawls and a toothed ring. With no teeth in the drive, there are none to skip.
- Power that does not wait for a tooth. Onyx says the hub carries your pedaling to the rear wheel instantly, for faster acceleration and more control. There is no gap between teeth to cross before it picks up.
- Silent coasting. Taking out the pawls also takes out the sound they make against the teeth, and removes the play that comes with them. The wheel coasts quietly.
Ibis and Onyx custom wheel questions
Which Onyx hub fits my Ibis rim?
The cards on this page start on the Onyx hub our customers build with each rim most often (Onyx Vesper Centerlock). The builder lists every Onyx hub that fits your rim, in the drillings and brake types that match.
Do you build Ibis rims on other hubs?
Yes. See our Ibis custom wheel page for every hub that fits each Ibis rim, or our Onyx custom wheel page for every rim on an Onyx hub.
Can you build with an Onyx hub or Ibis rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →