Skip to main content

Surly Wheels with Chris King Hubs

Surly custom wheel built by ProWheelBuilder

Custom Surly Wheels on Chris King Hubs

Pick a Surly rim we carry, put it on a Chris King hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Surly rims on Chris King hubs:

  • Made by specialists: Chris King hubs engineered, made and assembled in Portland, Oregon
  • Proven: Surly built the Clown Royal around the 6.2 inch tire on its own Moonlander; Chris King rates its RingDrive above 800 foot-pounds of torque
  • Built to last: Chris King makes its own bearings, which it says get faster with age
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: My Other Brother Darryl fat bike
Read more

Build your custom Surly wheel on Chris King hubs for:

Or start from a specific Chris King hub (3)

Or pick one of the 2 ready-made pairs below: each opens our custom wheel builder with the Surly rim and Chris King hub already chosen.

Where to start

The Surly and Chris King builds our customers choose most

Fat bike

Surly My Other Brother Darryl wheels on Chris King MTB 6-bolt hubs

Our fat bike pick from the Surly and Chris King parts we build with. The Surly My Other Brother Darryl is a hooked aluminum rim, 76.8mm inside, 16.1mm deep, sized for about 3.8 to 5 inch fat bike tires.

Specs and why it works

We lace it to Chris King MTB 6-bolt hubs in 32 hole.

  • Width that adds float. My Other Brother Darryl is 80mm across the outside. Surly says the wider footprint gives more flotation and traction than a narrower rim.
  • Matched bearing races. The inner and outer steel races are machined at the same time, with tools of equal wear, so the two match. Chris King says the bearing tracks burnish with use and get faster with age.

Fat Tire / Plus Bike

Surly rims on Chris King hubs for fat and plus bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Chris King hub our customers choose most with that rim. The builder offers every Chris King hub that fits, and you choose the colors, spokes and the rest.

More about Surly and Chris King wheels

Why the pairing, specs and FAQ

Custom hand built Surly wheels on Chris King hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Surly rims and Chris King hubs each bring

  • Width that adds float. My Other Brother Darryl is 80mm across the outside. Surly says the wider footprint gives more flotation and traction than a narrower rim.
  • A 100mm rim made for one tire. Surly designed the Clown Royal for the 6.2 inch Molenda tire on the Moonlander. It chose a 24 inch diameter to get the most tire volume that frame can hold.
  • Two drilling choices on the Darryl. It comes as a 32-hole symmetric rim, or with Surly's 64-hole Dual pattern, which lets a builder lace a centered wheel or an offset one. Surly lists a 15mm rim center offset.
  • RingDrive sits inside the shell. Chris King moved the engagement mechanism inboard of the large hub shell bearing. It says that gives more contact area than a traditional freehub and handles drivetrain torque better.
  • Every tooth engages at once. Two heat-treated stainless steel rings mesh at 72 points on mountain hubs and 45 on the R45, all at the same moment. Chris King rates the system above 800 foot-pounds of torque and says that is three times the other high-end hubs it tested.
  • Bearings it makes itself. Chris King designs and builds its own sealed angular-contact bearings, and each one is inspected and assembled by hand. Unlike a common radial bearing they can be adjusted in use, and Chris King says they wear in rather than wear out.

Surly and Chris King custom wheel questions

Which Chris King hub fits my Surly rim?

The cards on this page start on the Chris King hub our customers build with each rim most often (Chris King MTB 6-bolt). The builder lists every Chris King hub that fits your rim, in the drillings and brake types that match.

Do you build Surly rims on other hubs?

Yes. See our Surly custom wheel page for every hub that fits each Surly rim, or our Chris King custom wheel page for every rim on a Chris King hub.

Can you build with a Chris King hub or Surly rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.