Skip to main content

Teravail Wheels with Hope Hubs

The ProWheelBuilder workshop

Custom Teravail Wheels on Hope Hubs

Pick a Teravail rim we carry, put it on a Hope hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Teravail rims on Hope hubs:

  • Made by specialists: Hope hubs made under one roof in Barnoldswick, England
  • Proven: Teravail tests its Fluent mountain rim to ASTM category 3, for trail and all-mountain riding; Hope's Pro 5 engages at 108 points
  • Built to last: Hope holds spares for almost everything it has made; Teravail backs its rims with a lifetime warranty for the original owner
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Circos Carbon gravel · Fluent Carbon mountain
Read more

Build your custom Teravail wheel on Hope hubs for:

Or start from a specific Hope hub (3)

Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Teravail rim and Hope hub already chosen.

Where to start

The Teravail and Hope builds our customers choose most

Gravel

Teravail Circos Carbon wheels on Hope Pro 5 Centerlock hubs

Our gravel pick from the Teravail and Hope parts we build with. The Teravail Circos Carbon is a hookless carbon rim, 25mm inside, 30mm deep, about 365 grams in 700c, sized for about 35 to 50mm tires.

Specs and why it works

We lace it to Hope Pro 5 Centerlock hubs in 24 hole.

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Drag cut at the seal and the ratchet. Hope says the Pro 5's labyrinth seal keeps dirt out with zero drag. On the road, the RS4 rear goes a different way, with a reduced-drag two-pawl ratchet at 44 points, or 8 degrees.

Mountain

Teravail Fluent Carbon wheels on Hope Pro 5 Centerlock hubs

Our mountain pick from the Teravail and Hope parts we build with. The Teravail Fluent Carbon is a hookless carbon rim, 30mm inside, 25mm deep, about 450 grams in 29 inch, sized for about 2.3 to 2.6 inch tires.

Specs and why it works

We lace it to Hope Pro 5 Centerlock hubs in 32 hole.

  • Reinforced and tested. Teravail reinforces the spoke bed and requires nipple washers in its rims, so we build every Teravail wheel with them. Teravail tests the Fluent to ASTM category 3, the class for trail and all-mountain riding, and says it tested the Circos Wide 32 beyond that.
  • Spacers that change with your bike. End spacers swap to suit a different frame or axle, so the hub can move to your next bike. Hope publishes a conversion kit chart, and the Pro 5 front covers QR, 9mm, 12mm, 15mm, 20mm, Torq and Boost.

Questions about these builds

Which Teravail rim should I build on Hope hubs?

For gravel, the Circos Carbon (25mm inside) on Hope Pro 5 Centerlock hubs; for mountain, the Fluent Carbon (30mm inside) on Hope Pro 5 Centerlock hubs. Each one opens the builder from its section above, and the cards below cover every Teravail rim that fits a Hope hub.

Road / Cross / Gravel

Teravail rims on Hope hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Hope hub our customers choose most with that rim. The builder offers every Hope hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Teravail rims on Hope hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Hope hub our customers choose most with that rim. The builder offers every Hope hub that fits, and you choose the colors, spokes and the rest.

More about Teravail and Hope wheels

Why the pairing, specs and FAQ

Custom hand built Teravail wheels on Hope hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Teravail rims and Hope hubs each bring

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Front and rear drilled differently. Every Teravail rim comes in front-specific and rear-specific versions; the Circos Wide 32 even differs in width, 29mm inside at the front and 28mm at the rear. Teravail sets the drilling of each for better spoke bracing angles, so load passes smoothly from the rim through the nipples and spokes to the hub.
  • A thick hookless flange. Teravail gave the Circos a shallow profile with thick hookless flanges to keep the weight down and let the rim absorb and deflect around impacts. The Fluent's flange is extra thick for singletrack.
  • Made under one factory roof. Hope designs, tests and makes virtually all of its products in Barnoldswick, England, from CNC machining through anodizing to hand assembly. Hope says that gives it full control of quality and delivery.
  • Offset pawls on the Pro 5. Setting the freehub's six pawls out of step raises engagement from 44 points to 108, and the single speed hub reaches 108 with four. Hope cuts the pawls from high strength steel and says the new pawl and spring design adds load capacity and service life.
  • Drag cut at the seal and the ratchet. Hope says the Pro 5's labyrinth seal keeps dirt out with zero drag. On the road, the RS4 rear goes a different way, with a reduced-drag two-pawl ratchet at 44 points, or 8 degrees.

Check before you order

  • Tires. Every Teravail rim on this page is hookless, so choose a tire its maker rates for hookless rims.

Teravail and Hope custom wheel questions

Which Hope hub fits my Teravail rim?

The cards on this page start on the Hope hub our customers build with each rim most often (Hope Pro 5 Centerlock). The builder lists every Hope hub that fits your rim, in the drillings and brake types that match.

Do you build Teravail rims on other hubs?

Yes. See our Teravail custom wheel page for every hub that fits each Teravail rim, or our Hope custom wheel page for every rim on a Hope hub.

Can you build with a Hope hub or Teravail rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.