Skip to main content

Teravail Wheels with Paul Hubs

The ProWheelBuilder workshop

Custom Teravail Wheels on Paul Hubs

Pick a Teravail rim we carry, put it on a Paul hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Teravail rims on Paul hubs:

  • Made by specialists: Paul hubs machined in Chico, California
  • Proven: Teravail tests its Fluent mountain rim to ASTM category 3, for trail and all-mountain riding; Paul made the first purpose-built single speed mountain bike hub in 1996
  • Built to last: Paul's sealed bearings are user adjustable; Teravail backs its rims with a lifetime warranty for the original owner
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Circos Carbon gravel · Fluent Carbon mountain
Read more

Build your custom Teravail wheel on Paul hubs for:

Or start from a specific Paul hub (2)

Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Teravail rim and Paul hub already chosen.

Where to start

The Teravail and Paul builds our customers choose most

Gravel

Teravail Circos Carbon wheels on Paul FHub Disc hubs

Our gravel pick from the Teravail and Paul parts we build with. The Teravail Circos Carbon is a hookless carbon rim, 25mm inside, 30mm deep, about 365 grams in 700c, sized for about 35 to 50mm tires.

Specs and why it works

We lace it to Paul FHub Disc hubs (front wheel) in 24 hole.

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Less stress at the spoke head. Spoke holes are chamfered, and on the WORD the flanges are canted toward the rim. Paul does this to reduce stress on the head and elbow of each spoke.

Mountain

Teravail Fluent Carbon wheels on Paul FHub Disc hubs

Our mountain pick from the Teravail and Paul parts we build with. The Teravail Fluent Carbon is a hookless carbon rim, 30mm inside, 25mm deep, about 450 grams in 29 inch, sized for about 2.3 to 2.6 inch tires.

Specs and why it works

We lace it to Paul FHub Disc hubs (front wheel) in 32 hole.

  • Reinforced and tested. Teravail reinforces the spoke bed and requires nipple washers in its rims, so we build every Teravail wheel with them. Teravail tests the Fluent to ASTM category 3, the class for trail and all-mountain riding, and says it tested the Circos Wide 32 beyond that.
  • The hub that started single speed mountain bikes. Paul introduced the Wacky One-Speed Rear Device in 1996 and calls it the first purpose-built single speed mountain bike hub. Paul says its 52mm chainline is a standard that continues today.

Questions about these builds

Which Teravail rim should I build on Paul hubs?

For gravel, the Circos Carbon (25mm inside) on Paul FHub Disc hubs; for mountain, the Fluent Carbon (30mm inside) on Paul FHub Disc hubs. Each one opens the builder from its section above, and the cards below cover every Teravail rim that fits a Paul hub.

Road / Cross / Gravel

Teravail rims on Paul hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rim and hub for a front wheel already picked, on the Paul hub our customers choose most with that rim. The builder offers every Paul hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Teravail rims on Paul hubs for mountain bikes

Each card opens our custom wheel builder with the rim and hub for a front wheel already picked, on the Paul hub our customers choose most with that rim. The builder offers every Paul hub that fits, and you choose the colors, spokes and the rest.

More about Teravail and Paul wheels

Why the pairing, specs and FAQ

Custom hand built Teravail wheels on Paul hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Teravail rims and Paul hubs each bring

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Front and rear drilled differently. Every Teravail rim comes in front-specific and rear-specific versions; the Circos Wide 32 even differs in width, 29mm inside at the front and 28mm at the rear. Teravail sets the drilling of each for better spoke bracing angles, so load passes smoothly from the rim through the nipples and spokes to the hub.
  • A thick hookless flange. Teravail gave the Circos a shallow profile with thick hookless flanges to keep the weight down and let the rim absorb and deflect around impacts. The Fluent's flange is extra thick for singletrack.
  • The hub that started single speed mountain bikes. Paul introduced the Wacky One-Speed Rear Device in 1996 and calls it the first purpose-built single speed mountain bike hub. Paul says its 52mm chainline is a standard that continues today.
  • A rear wheel with no dish. On the WORD, Paul spread the flanges as far as it could while leaving room for freewheel threads. Both sides of the wheel can then be built alike, which Paul says makes a strong dishless wheel.
  • An axle that runs from dropout to dropout. The disc hubs use an interchangeable 7075 aluminum axle in quick release, bolt-on or thru axle form, not end caps that can fall off when the wheel comes out. Change forks later and you change the axle, not the hub.

Check before you order

  • Tires. Every Teravail rim on this page is hookless, so choose a tire its maker rates for hookless rims.

Teravail and Paul custom wheel questions

Which Paul hub fits my Teravail rim?

The cards on this page start on the Paul hub our customers build with each rim most often (Paul FHub Disc). The builder lists every Paul hub that fits your rim, in the drillings and brake types that match.

Do you build Teravail rims on other hubs?

Yes. See our Teravail custom wheel page for every hub that fits each Teravail rim, or our Paul custom wheel page for every rim on a Paul hub.

Can you build with a Paul hub or Teravail rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.