Skip to main content

Teravail Wheels with Phil Wood Hubs

The ProWheelBuilder workshop

Custom Teravail Wheels on Phil Wood Hubs

Pick a Teravail rim we carry, put it on a Phil Wood hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Teravail rims on Phil Wood hubs:

  • Made by specialists: Phil Wood hubs designed, made and assembled in San Jose, California since 1971
  • Proven: Teravail tests its Fluent mountain rim to ASTM category 3, for trail and all-mountain riding; Phil Wood specifies every bearing it uses, many made only for it
  • Built to last: Phil Wood gives the original owner a limited lifetime warranty; Teravail backs its rims with a lifetime warranty for the original owner
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Circos Carbon gravel · Fluent Carbon mountain
Read more

Build your custom Teravail wheel on Phil Wood hubs for:

Or start from a specific Phil Wood hub (1)

Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Teravail rim and Phil Wood hub already chosen.

Where to start

The Teravail and Phil Wood builds our customers choose most

Gravel

Teravail Circos Carbon wheels on Phil Wood Pro Disc hubs

Our gravel pick from the Teravail and Phil Wood parts we build with. The Teravail Circos Carbon is a hookless carbon rim, 25mm inside, 30mm deep, about 365 grams in 700c, sized for about 35 to 50mm tires.

Specs and why it works

We lace it to Phil Wood Pro Disc hubs in 24 hole.

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Two bearing choices. Standard bearings have full contact seals and a full fill of Phil Waterproof Grease for wet, dirty riding. Carbonyte bearings have partial contact seals and a 30 percent fill of synthetic grease for lower drag.

Mountain

Teravail Fluent Carbon wheels on Phil Wood Pro Disc hubs

Our mountain pick from the Teravail and Phil Wood parts we build with. The Teravail Fluent Carbon is a hookless carbon rim, 30mm inside, 25mm deep, about 450 grams in 29 inch, sized for about 2.3 to 2.6 inch tires.

Specs and why it works

We lace it to Phil Wood Pro Disc hubs in 32 hole.

  • Reinforced and tested. Teravail reinforces the spoke bed and requires nipple washers in its rims, so we build every Teravail wheel with them. Teravail tests the Fluent to ASTM category 3, the class for trail and all-mountain riding, and says it tested the Circos Wide 32 beyond that.
  • A cassette mechanism with five double-row pawls. Heat-treated stainless pawls engage a 40-tooth ratchet ring in a hard anodized 7075 body. Phil says some backpedal resistance is normal for up to 350 miles of break-in, and it suggests servicing the mechanism at least every three months.

Questions about these builds

Which Teravail rim should I build on Phil Wood hubs?

For gravel, the Circos Carbon (25mm inside) on Phil Wood Pro Disc hubs; for mountain, the Fluent Carbon (30mm inside) on Phil Wood Pro Disc hubs. Each one opens the builder from its section above, and the cards below cover every Teravail rim that fits a Phil Wood hub.

Road / Cross / Gravel

Teravail rims on Phil Wood hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Phil Wood hub our customers choose most with that rim. The builder offers every Phil Wood hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Teravail rims on Phil Wood hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Phil Wood hub our customers choose most with that rim. The builder offers every Phil Wood hub that fits, and you choose the colors, spokes and the rest.

More about Teravail and Phil Wood wheels

Why the pairing, specs and FAQ

Custom hand built Teravail wheels on Phil Wood hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Teravail rims and Phil Wood hubs each bring

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Front and rear drilled differently. Every Teravail rim comes in front-specific and rear-specific versions; the Circos Wide 32 even differs in width, 29mm inside at the front and 28mm at the rear. Teravail sets the drilling of each for better spoke bracing angles, so load passes smoothly from the rim through the nipples and spokes to the hub.
  • A thick hookless flange. Teravail gave the Circos a shallow profile with thick hookless flanges to keep the weight down and let the rim absorb and deflect around impacts. The Fluent's flange is extra thick for singletrack.
  • Built around low maintenance since 1971. Phil Wood was founded to make maintenance-free hubs and still designs, makes and assembles them in San Jose, California. A front hub shell passes through seven production stations before assembly.
  • Two bearing choices. Standard bearings have full contact seals and a full fill of Phil Waterproof Grease for wet, dirty riding. Carbonyte bearings have partial contact seals and a 30 percent fill of synthetic grease for lower drag.
  • Bearings made to Phil's spec. Phil Wood specifies the characteristics of every bearing it uses, and it says many are made exclusively for it. If a bearing wears out, Phil's answer is to replace the cartridge rather than repack it.

Check before you order

  • Tires. Every Teravail rim on this page is hookless, so choose a tire its maker rates for hookless rims.

Teravail and Phil Wood custom wheel questions

Which Phil Wood hub fits my Teravail rim?

The cards on this page start on the Phil Wood hub our customers build with each rim most often (Phil Wood Pro Disc). The builder lists every Phil Wood hub that fits your rim, in the drillings and brake types that match.

Do you build Teravail rims on other hubs?

Yes. See our Teravail custom wheel page for every hub that fits each Teravail rim, or our Phil Wood custom wheel page for every rim on a Phil Wood hub.

Can you build with a Phil Wood hub or Teravail rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.