There are no products listed under this category.
Convergence We Are 1 Wheels with Onyx Hubs



Custom Convergence We Are 1 Wheels on Onyx Hubs
Pick a Convergence We Are 1 rim we carry, put it on an Onyx hub, and we lace and true the wheel by hand in our Georgia shop.
Why build Convergence We Are 1 rims on Onyx hubs:
- Made by specialists: Convergence We Are 1 rims laid up by hand in Kamloops, British Columbia, each with its own serial number, on Onyx hubs machined in Minnesota
- Proven: WR1 credits the Z-axis film in its spoke bed for a rim 32 percent stronger than the last generation; Onyx drives through a sprag clutch, with no teeth to skip
- Built to last: Onyx hubs coast silently, with no pawls to wear
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Wanderer Carbon gravel · Coup Carbon mountain
Build your custom Convergence We Are 1 wheel on Onyx hubs for:
Or start from the Onyx hub you want:
Or pick one of the 9 ready-made pairs below: each opens our custom wheel builder with the Convergence We Are 1 rim and Onyx hub already chosen.
Gravel in depth
Convergence We Are 1 Wanderer Carbon wheels on Onyx Vesper Centerlock hubs
Our gravel pick from the Convergence We Are 1 and Onyx parts we build with. The Convergence We Are 1 Wanderer Carbon is a hookless carbon rim, 27mm inside, 21mm deep, about 440 grams in 700c, sized for about 40mm to 2.2 inch tires. We lace it to Onyx Vesper Centerlock hubs in 32 hole.
- A layup for each discipline. The Whisp, Sector, Triad, Deal, Fuse, Revive and Wanderer are separate rims for XC, trail, enduro, downhill, e-bike, gravel and bikepacking. Each is tuned for its own job rather than adapted from a single design.
- Standard spokes and rotor mounts. For all the unusual drive, these are J-bend hubs that take standard J-bend spokes, the easiest kind to find anywhere. Vesper and MTB disc models come in Centerlock and 6-bolt.
Start building this pair:
Mountain in depth
Convergence We Are 1 Coup Carbon wheels on Onyx Vesper Centerlock hubs
Our mountain pick from the Convergence We Are 1 and Onyx parts we build with. The Convergence We Are 1 Coup Carbon is a hookless carbon rim, 21mm deep. We lace it to Onyx Vesper Centerlock hubs in 32 hole.
- A wave-shaped rim wall. Convergence rims alternate faces angled 7.5 degrees on mountain models and 6 degrees on gravel and bikepacking models, so each nipple bed points straight at its hub flange. WR1 says this gives a straight spoke line and full contact around the nipple, so no one point takes the load.
- A weight trade-off. These hubs are heavier than pawl hubs, so they suit riders who want the engagement and the silence enough to carry the extra grams.
Start building this pair:
Questions about these builds
Which Convergence We Are 1 rim should I build on Onyx hubs?
For gravel, the Wanderer Carbon (27mm inside) on Onyx Vesper Centerlock hubs; for mountain, the Coup Carbon on Onyx Vesper Centerlock hubs. Each one opens the builder from its section above, and the cards below cover every Convergence We Are 1 rim that fits an Onyx hub.
Road / Cross / Gravel
Convergence We Are 1 rims on Onyx hubs for road, cross and gravel bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Onyx hub our customers choose most with that rim. The builder offers every Onyx hub that fits, and you choose the colors, spokes and the rest.
Convergence We Are 1 Wanderer Carbon on Onyx Vesper Centerlock27mm inside · 21mm deep · 32 hole · hooklessStart building this pair →
Convergence We Are 1 Whisp Carbon on Onyx Vesper Centerlock29mm inside · 21mm deep · 24 hole · hooklessStart building this pair →
Convergence We Are 1 Revive Carbon on Onyx Vesper Centerlock25mm inside · 19mm deep · 24 hole · hooklessStart building this pair →
Mountain Bike
Convergence We Are 1 rims on Onyx hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Onyx hub our customers choose most with that rim. The builder offers every Onyx hub that fits, and you choose the colors, spokes and the rest.
Convergence We Are 1 Coup Carbon on Onyx Vesper Centerlock21mm deep · 32 hole · hooklessStart building this pair →
Convergence We Are 1 Deal Carbon on Onyx Vesper Centerlock29mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →
Convergence We Are 1 Fuse Carbon on Onyx Vesper Centerlock33mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →
Convergence We Are 1 Hush 32 Carbon on Onyx Vesper Centerlock26mm deep · 24 hole · hooklessStart building this pair →
Convergence We Are 1 Sector Carbon on Onyx Vesper Centerlock29mm inside · 21mm deep · 32 hole · hooklessStart building this pair →
Convergence We Are 1 Triad Carbon on Onyx Vesper Centerlock30mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →More about Convergence We Are 1 and Onyx wheels
Why the pairing, specs and FAQ
Custom hand built Convergence We Are 1 wheels on Onyx hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What Convergence We Are 1 rims and Onyx hubs each bring
- A named builder on every rim. Industry Nine bought We Are One in 2025, and the rims are still laid by hand in Kamloops, British Columbia, under the WR1 name. Each one is laid up by a named technician and gets a serial number.
- A wave-shaped rim wall. Convergence rims alternate faces angled 7.5 degrees on mountain models and 6 degrees on gravel and bikepacking models, so each nipple bed points straight at its hub flange. WR1 says this gives a straight spoke line and full contact around the nipple, so no one point takes the load.
- Z-axis film in the spoke bed. A composite film from Boston Materials, with 13 billion Z-axis carbon fibers per square meter, is built into the spoke bed. WR1 credits it for a rim 32 percent stronger than the previous generation.
- A patented sprag clutch instead of pawls. Onyx hubs drive through a sprag clutch, not pawls and a toothed ring. With no teeth in the drive, there are none to skip.
- Power that does not wait for a tooth. Onyx says the hub carries your pedaling to the rear wheel instantly, for faster acceleration and more control. There is no gap between teeth to cross before it picks up.
- Silent coasting. Taking out the pawls also takes out the sound they make against the teeth, and removes the play that comes with them. The wheel coasts quietly.
Check before you order
- Tires. Every Convergence We Are 1 rim on this page is hookless, so choose a tire its maker rates for hookless rims.
Convergence We Are 1 and Onyx custom wheel questions
Which Onyx hub fits my Convergence We Are 1 rim?
The cards on this page start on the Onyx hub our customers build with each rim most often (Onyx Vesper Centerlock). The builder lists every Onyx hub that fits your rim, in the drillings and brake types that match.
Do you build Convergence We Are 1 rims on other hubs?
Yes. See our Convergence We Are 1 custom wheel page for every hub that fits each Convergence We Are 1 rim, or our Onyx custom wheel page for every rim on an Onyx hub.
Can you build with an Onyx hub or Convergence We Are 1 rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →