Convergence We Are 1 Wheels with Phil Wood Hubs

Gravel in depth

Convergence We Are 1 Wanderer Carbon wheels on Phil Wood Pro Disc hubs

Our gravel pick from the Convergence We Are 1 and Phil Wood parts we build with. The Convergence We Are 1 Wanderer Carbon is a hookless carbon rim, 27mm inside, 21mm deep, about 440 grams in 700c, sized for about 40mm to 2.2 inch tires. We lace it to Phil Wood Pro Disc hubs in 32 hole.

• A layup for each discipline. The Whisp, Sector, Triad, Deal, Fuse, Revive and Wanderer are separate rims for XC, trail, enduro, downhill, e-bike, gravel and bikepacking. Each is tuned for its own job rather than adapted from a single design.
• Two bearing choices. Standard bearings have full contact seals and a full fill of Phil Waterproof Grease for wet, dirty riding. Carbonyte bearings have partial contact seals and a 30 percent fill of synthetic grease for lower drag.

Start building this pair:

Mountain in depth

Convergence We Are 1 Coup Carbon wheels on Phil Wood Pro Disc hubs

Our mountain pick from the Convergence We Are 1 and Phil Wood parts we build with. The Convergence We Are 1 Coup Carbon is a hookless carbon rim, 21mm deep. We lace it to Phil Wood Pro Disc hubs in 32 hole.

• A wave-shaped rim wall. Convergence rims alternate faces angled 7.5 degrees on mountain models and 6 degrees on gravel and bikepacking models, so each nipple bed points straight at its hub flange. WR1 says this gives a straight spoke line and full contact around the nipple, so no one point takes the load.
• A cassette mechanism with five double-row pawls. Heat-treated stainless pawls engage a 40-tooth ratchet ring in a hard anodized 7075 body. Phil says some backpedal resistance is normal for up to 350 miles of break-in, and it suggests servicing the mechanism at least every three months.

Start building this pair:

Questions about these builds

Which Convergence We Are 1 rim should I build on Phil Wood hubs?

For gravel, the Wanderer Carbon (27mm inside) on Phil Wood Pro Disc hubs; for mountain, the Coup Carbon on Phil Wood Pro Disc hubs. Each one opens the builder from its section above, and the cards below cover every Convergence We Are 1 rim that fits a Phil Wood hub.

Mountain Bike

Convergence We Are 1 rims on Phil Wood hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Phil Wood hub our customers choose most with that rim. The builder offers every Phil Wood hub that fits, and you choose the colors, spokes and the rest.

Convergence We Are 1 Coup Carbon on Phil Wood Pro Disc21mm deep · 32 hole · hooklessStart building this pair →Convergence We Are 1 Deal Carbon on Phil Wood Pro Disc29mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →Convergence We Are 1 Fuse Carbon on Phil Wood Pro Disc33mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →Convergence We Are 1 Hush 32 Carbon on Phil Wood Pro Disc26mm deep · 24 hole · hooklessStart building this pair →Convergence We Are 1 Sector Carbon on Phil Wood Pro Disc29mm inside · 21mm deep · 32 hole · hooklessStart building this pair →Convergence We Are 1 Triad Carbon on Phil Wood Pro Disc30mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →