Skip to main content

VELO ORANGE FREEWHEEL REAR HUB, 126MM

Velo Orange

$95.00
(No reviews yet) Write a Review
SKU:
veloorangefreewheelrearhub126mm-36-POL
Selected Color is
Adding to cart… The item has been added

A high-flange 126mm rear for the frames modern hubs no longer fit.

  • 126mm quick-release spacing for 5, 6 and 7 speed road and touring frames
  • Threaded for standard English-thread freewheels (freewheel not included)
  • Cold-forged, CNC-machined shell, high polish clear anodized, sealed cartridge bearings
  • 61mm flanges, 36 hole, 295 grams, internal cam QR skewer included
Read more

Velo Orange Freewheel Rear Hub, 126mm

The Velo Orange Freewheel Rear Hub is a high-flange 126mm rear hub for the frames most modern hubs no longer fit: older road, sport-touring and touring bikes built for a 5, 6 or 7 speed freewheel. It has a cold-forged, CNC-machined shell with a high polish clear anodized finish, sealed cartridge bearings, 61mm flanges and 36 spoke holes, and it weighs 295 grams. Velo Orange includes an internal cam quick-release skewer.

This page covers the 126mm freewheel rear. We build it to order: choose the rim, spokes and nipples in our configurator and we lace, tension and true the wheel by hand in Georgia.

Design and construction

Velo Orange made this hub because a good high-flange freewheel hub in 126mm spacing has become hard to find. Instead of a freehub body, the hub has a threaded drive side that takes a standard English-thread freewheel, the same fitting used by most 5, 6 and 7 speed freewheels. The freewheel is not included; you keep the gearing your bike already runs.

The shell is cold forged and then CNC machined, and the high polish clear anodized finish is meant to hold up to bad weather. Both flanges are 61mm across, which makes room for the sealed cartridge bearings and gives the classic high-flange look. The flanges sit 41mm left and 21mm right of center: a freewheel rear needs a lot of dish, so the drive-side spokes carry most of the tension.

How it rides

On the bike this is a quiet, low-maintenance rear. Velo Orange chose sealed cartridge bearings so the hub keeps spinning for years without regular service, and the polished shell suits a restored classic or a working touring bike.

It comes in 36 hole only. That suits a rear wheel with this much dish: more spokes share the load, which matters for a loaded touring bike or a heavier rider. Pair it with a sturdy rim-brake rim and it makes a durable, easily serviced wheel.

Specifications

PositionRear
BrakeRim brake
AxleQR 5x126mm, internal cam skewer included
DriveThreaded for English-thread freewheels, 5, 6 or 7 speed (freewheel not included)
Drilling36h
Spoke headJ-bend
Flange diameter61 mm, both sides
Left center-to-flange41 mm
Right center-to-flange21 mm
Weight295g
BearingsSealed cartridge
ShellCold forged and CNC machined aluminum alloy
FinishPolished, clear anodized

About this listing

This listing is the Velo Orange 126mm freewheel rear: rim brake, quick release, 36 hole, polished, about 295g, with Velo Orange's internal cam skewer.

If your frame is spaced 130mm or 135mm and takes a cassette, the Velo Orange Chronos Rear Hub is the better choice. Velo Orange does not make a 36-hole front to match this rear, so the configurator pairs it with a front hub from another maker in the same drilling.

Sizes, fit and compatibility

The hub needs a frame with 126mm rear spacing and a quick-release dropout, which covers most road and sport-touring frames from the 5, 6 and 7 speed era. Measure the inside of your rear dropouts before you order. A hub that does not match the frame spacing should not be forced in.

It takes a standard English-thread freewheel with 5, 6 or 7 cogs; it will not take a cassette. It is laced with J-bend spokes, and any rim-brake rim in 36 hole works. The polished Velo Orange Enterprise and Voyager rims are the classic match. In the configurator choose road or touring as the bike type and it recommends a spoke gauge and lacing pattern.

Put it in a custom wheel

Build a custom wheel around the Velo Orange Freewheel Rear Hub, 126mm — the link drops you into our Custom Wheel Program with this hub pinned, ready for you to choose the rest. It is set up for road rim brake and touring builds.

Testing and standards at Velo Orange

Velo Orange describes the hub shell as cold forged and CNC'd, with a high polish clear anodized finish that will hold up to even the worst weather, and fits sealed cartridge bearings so the hub needs no regular maintenance. Velo Orange does not publish impact, fatigue or ISO test results for this hub.

Source on Velo Orange's site:

Velo Orange publishes those claims; ProWheelBuilder builds the hub into a wheel and does not test it in a lab.

Building it at ProWheelBuilder

Velo Orange makes the freewheel hub; ProWheelBuilder is an independent custom wheel builder in Georgia, not the manufacturer. We measure the rim before a spoke is cut, bring the wheel up to tension in stages with a gauge, stress-relieve it between rounds and true it last. A heavily dished freewheel rear gets the same care on both sides so the tension stays even within each side.

The configurator only offers rims, spokes and nipples that fit this hub, strikes through combinations that are not made rather than hiding them, and prices the wheel live as you choose.

Warranty

Velo Orange's warranty. Velo Orange exchanges defective parts and accessories, its rims and hubs among them, for one year from the purchase date. Proof of purchase is required, because the warranty period runs from the day the part was bought.

ProWheelBuilder. Our one-year wheel warranty applies to any wheel we build around this part, alongside whatever the manufacturer offers. Inside that year, broken spokes are replaced no matter how they broke, and the wheel labor is ours - truing, re-tensioning or a full rebuild. A rim or hub failure that the maker covers, we claim for you and see through; one the maker declines, we answer with an eligible replacement at 25% off current retail. Shipping both ways is yours, and components you supply yourself fall outside this cover.

Full terms are on our Policies & Warranty page.

Freewheel Rear Hub questions

Will it fit my bike?

Only if your frame's rear dropouts are spaced 126mm, the usual spacing for road and sport-touring bikes with 5, 6 or 7 speed freewheels. Measure between the inside faces of the rear dropouts before you order.

Is a freewheel included?

No. The hub is threaded for a standard English-thread freewheel, so you can move your current freewheel across or fit a new 5, 6 or 7 speed one.

Can I put a cassette on it?

No. This is a freewheel hub. For a cassette, look at the Velo Orange Chronos Rear Hub.

Does it come with a skewer?

Yes. Velo Orange includes an internal cam quick-release skewer.

Why only 36 hole?

Velo Orange makes this hub in 36 hole only. For a freewheel rear with this much dish, 36 spokes make a strong, durable wheel.

Is ProWheelBuilder the manufacturer of the Velo Orange Freewheel Rear Hub?

No. Velo Orange makes the hub. ProWheelBuilder is an independent custom wheel builder in Georgia that builds it into a wheel to your spec.

Not sure? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929 — you will be talking to the people who build the wheels.