Boyd Wheels with Industry Nine Hubs

Gravel in depth

Boyd CCC wheels on Industry Nine 1/1 Road hubs

Our gravel pick from the Boyd and Industry Nine parts we build with. The Boyd CCC is a hooked aluminum rim, 25mm inside, 25.5mm deep, about 415 grams in 700c, sized for about 35 to 50mm tires. We lace it to Industry Nine 1/1 Road hubs in 28 hole.

• Tubeless or tubes. Every Boyd rim has a tubeless bed, and the tubeless tape also works as a rim strip. You can run either setup on the same rim.
• The 1/1 keeps it simple. A dual-phase pawl drive gives 90 points of engagement, or 4 degrees, on high-capacity bearings. Conventional flanges and standard J-bend steel spokes mean it can be serviced anywhere, with no proprietary tools.

Start building this pair:

Mountain in depth

Boyd Bracken wheels on Industry Nine Hydra 2 MTB Centerlock hubs

Our mountain pick from the Boyd and Industry Nine parts we build with. The Boyd Bracken is a hookless aluminum rim, 30mm inside, 19mm deep, about 490 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Industry Nine Hydra 2 MTB Centerlock hubs in 32 hole.

• Podium and Prologue tiers. Podium rims add variable thickness in the rim bed to save weight. Podium aluminum rims are also sandblasted and anodized after forming, with water transfer decals, while Prologue aluminum rims come from a faster, more automated process.
• Hydra2 reinforced from real use. Industry Nine says feedback from over 100,000 ridden Hydra hubs showed it where to push further. The result is an axle 65 percent thicker, larger bearings and a full-contact seal system.

Start building this pair:

Road in depth

Boyd Altamont wheels on Industry Nine 1/1 Road hubs

Our road pick from the Boyd and Industry Nine parts we build with. The Boyd Altamont is a hooked aluminum rim, 21mm inside, 26mm deep, about 420 grams in 700c, sized for about 28 to 38mm tires. We lace it to Industry Nine 1/1 Road hubs in 28 hole.

• SOLiX and continuous phasing. Five pawls work against a 121-tooth drive ring for 605 points of engagement, or 0.59 degrees. Industry Nine says power arrives at once and then loads progressively, in a light hub for cross-country, gravel and road.

Start building this pair:

Questions about these builds

Which Boyd rim should I build on Industry Nine hubs?

For gravel, the CCC (25mm inside) on Industry Nine 1/1 Road hubs; for mountain, the Bracken (30mm inside) on Industry Nine Hydra 2 MTB Centerlock hubs; for road, the Altamont (21mm inside) on Industry Nine 1/1 Road hubs. Each one opens the builder from its section above, and the cards below cover every Boyd rim that fits an Industry Nine hub.

Mountain Bike

Boyd rims on Industry Nine hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Industry Nine hub our customers choose most with that rim. The builder offers every Industry Nine hub that fits, and you choose the colors, spokes and the rest.

Boyd Bracken on Industry Nine Hydra 2 MTB Centerlock30mm inside · 19mm deep · 32 hole · hooklessStart building this pair →Boyd Kanuga on Industry Nine Hydra 2 MTB Centerlock30mm inside · 19mm deep · 32 hole · hooklessStart building this pair →Boyd Ridgeline Carbon on Industry Nine Hydra 2 MTB Centerlock30mm inside · 25mm deep · 32 hole · hooklessStart building this pair →Boyd Stumphouse on Industry Nine Hydra 2 MTB Centerlock30mm inside · 24mm deep · 32 hole · hooklessStart building this pair →Boyd Trailblazer Carbon on Industry Nine Hydra 2 MTB Centerlock26mm inside · 25mm deep · 28 hole · hooklessStart building this pair →