Derby Wheels with Industry Nine Hubs

Gravel in depth

Derby Carbon BX 25i wheels on Industry Nine 1/1 Road hubs

Our gravel pick from the Derby and Industry Nine parts we build with. The Derby Carbon BX 25i is a hookless carbon rim, 25mm inside, 32.5mm deep, about 415 grams in 650b, sized for about 35 to 50mm tires. We lace it to Industry Nine 1/1 Road hubs in 28 hole.

• Ridges that hold the bead. A retention ridge forms a channel for the tire bead, which Derby says secures tubed and tubeless tires and prevents burping. A deep center channel eases mounting, and Derby says tubeless tires air up with a floor pump.
• The 1/1 keeps it simple. A dual-phase pawl drive gives 90 points of engagement, or 4 degrees, on high-capacity bearings. Conventional flanges and standard J-bend steel spokes mean it can be serviced anywhere, with no proprietary tools.

Start building this pair:

Mountain in depth

Derby Carbon DH 40i wheels on Industry Nine Hydra 2 MTB Centerlock hubs

Our mountain pick from the Derby and Industry Nine parts we build with. The Derby Carbon DH 40i is a hookless carbon rim, 39.5mm inside, 31mm deep, about 565 grams in 29 inch, sized for about 2.8 to 3.0 inch plus tires. We lace it to Industry Nine Hydra 2 MTB Centerlock hubs in 32 hole.

• The same shape in different layups. The 29 x 35i comes in a trail layup at about 515 grams with a 225 pound rider limit, and a downhill layup at about 630 grams with a 300 pound limit. You choose how much strength to carry for how you ride.
• Hydra2 reinforced from real use. Industry Nine says feedback from over 100,000 ridden Hydra hubs showed it where to push further. The result is an axle 65 percent thicker, larger bearings and a full-contact seal system.

Start building this pair:

Questions about these builds

Which Derby rim should I build on Industry Nine hubs?

For gravel, the Carbon BX 25i (25mm inside) on Industry Nine 1/1 Road hubs; for mountain, the Carbon DH 40i (39.5mm inside) on Industry Nine Hydra 2 MTB Centerlock hubs. Each one opens the builder from its section above, and the cards below cover every Derby rim that fits an Industry Nine hub.

Mountain Bike

Derby rims on Industry Nine hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Industry Nine hub our customers choose most with that rim. The builder offers every Industry Nine hub that fits, and you choose the colors, spokes and the rest.

Derby Carbon DH 40i on Industry Nine Hydra 2 MTB Centerlock39.5mm inside · 31mm deep · 32 hole · hooklessStart building this pair →Derby Carbon DH 35i on Industry Nine Hydra 2 MTB Centerlock34.5mm inside · 31mm deep · 32 hole · hooklessStart building this pair →Derby Carbon Tr 40i on Industry Nine Hydra 2 MTB Centerlock39.5mm inside · 31mm deep · 32 hole · hooklessStart building this pair →Derby Carbon DH 30i on Industry Nine Hydra 2 MTB Centerlock29.5mm inside · 31mm deep · 32 hole · hooklessStart building this pair →Derby Carbon Tr 30i on Industry Nine Hydra 2 MTB Centerlock29.5mm inside · 31mm deep · 32 hole · hooklessStart building this pair →Derby Carbon Tr 35i on Industry Nine Hydra 2 MTB Centerlock34.5mm inside · 31mm deep · 32 hole · hooklessStart building this pair →