There are no products listed under this category.
Industry Nine Wheels with Boyd Hubs
Custom Industry Nine Wheels on Boyd Hubs
Pick an Industry Nine rim we carry, put it on a Boyd hub, and we lace and true the wheel by hand in our Georgia shop.
Why build Industry Nine rims on Boyd hubs:
- Proven: Industry Nine says its downhill and freeride athletes have proven the Grade 300; Boyd's 36-tooth hubs engage every 5 degrees
- Built to last: Boyd hubs change freehubs by hand and spin on Enduro ABEC-5 bearings; Industry Nine gives its rims a hollow bead wall for impact resistance
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Grade 300 Aluminum mountain
Build your custom Industry Nine wheel on Boyd hubs for:
Or start from the Boyd hub you want:
Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Industry Nine rim and Boyd hub already chosen.
Mountain in depth
Industry Nine Grade 300 Aluminum wheels on Boyd Quest hubs
Our mountain pick from the Industry Nine and Boyd parts we build with. The Industry Nine Grade 300 Aluminum is a hookless aluminum rim, 30mm inside, 21.5mm deep, about 620 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Boyd Quest hubs (rear wheel) in 32 hole.
- A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
- Five degrees of engagement. The 85 Road and the Quest both turn on 36 teeth and engage every 5 degrees. That cuts the dead spot before the drive catches when you start pedaling again, such as coming out of a corner.
Start building this pair:
Mountain Bike
Industry Nine rims on Boyd hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Boyd hub our customers choose most with that rim. The builder offers every Boyd hub that fits, and you choose the colors, spokes and the rest.
Industry Nine Grade 300 Aluminum on Boyd Quest30mm inside · 21.5mm deep · 32 hole · hookless · rear wheelStart building this pair →
Industry Nine Sector Aluminum on Boyd Quest28.5mm inside · 21.3mm deep · 28 hole · hooklessStart building this pair →
Industry Nine Triad Aluminum on Boyd Quest30mm inside · 21.3mm deep · 28 hole · hooklessStart building this pair →More about Industry Nine and Boyd wheels
Why the pairing, specs and FAQ
Custom hand built Industry Nine wheels on Boyd hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What Industry Nine rims and Boyd hubs each bring
- Hollow bead walls. The Sector and Triad are extruded from 6069 aluminum, and all three rims use a hollow bead wall, the part that takes the hit from a rock. Industry Nine says that adds pinch flat protection and impact resistance.
- A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
- One rim for each kind of riding. The Sector is the trail rim at 28.5mm wide inside, the Triad is the enduro rim at 30mm, and the Grade 300 is the downhill and freeride rim at 30mm. All three stay close to 21mm deep, so the choice comes down to how hard you ride.
- Five degrees of engagement. The 85 Road and the Quest both turn on 36 teeth and engage every 5 degrees. That cuts the dead spot before the drive catches when you start pedaling again, such as coming out of a corner.
- Three pawls at a time on the Quest. The Quest has six pawls working in two sets of three on its 36-tooth ring, so three pawls carry the load at each engagement.
- Tool-free changes. Quest end caps and freehub bodies swap by hand, and the 85 Road offers tool-free service with a swappable freehub. A new frame, axle standard or groupset does not have to mean a new hub.
Check before you order
- Tires. Every Industry Nine rim on this page is hookless, so choose a tire its maker rates for hookless rims.
Industry Nine and Boyd custom wheel questions
Which Boyd hub fits my Industry Nine rim?
The cards on this page start on the Boyd hub our customers build with each rim most often (Boyd Quest). The builder lists every Boyd hub that fits your rim, in the drillings and brake types that match.
Do you build Industry Nine rims on other hubs?
Yes. See our Industry Nine custom wheel page for every hub that fits each Industry Nine rim, or our Boyd custom wheel page for every rim on a Boyd hub.
Can you build with a Boyd hub or Industry Nine rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →