There are no products listed under this category.
Industry Nine Wheels with Industry Nine Hubs
Custom Industry Nine Wheels on Industry Nine Hubs
Pick an Industry Nine rim we carry, put it on an Industry Nine hub, and we lace and true the wheel by hand in our Georgia shop.
Why build Industry Nine rims on Industry Nine hubs:
- Made by specialists: Industry Nine hubs machined and anodized in Asheville, North Carolina
- Proven: Industry Nine says its downhill and freeride athletes have proven the Grade 300; Industry Nine built the Hydra2 from feedback on over 100,000 ridden hubs
- Built to last: Industry Nine's classic hubs take standard J-bend spokes and service without proprietary tools; Industry Nine gives its rims a hollow bead wall for impact resistance
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Grade 300 Aluminum mountain
Build your custom Industry Nine wheel on Industry Nine hubs for:
Or start from the Industry Nine hub you want:
Hydra2 MTB Centerlock→Hydra2 MTB 6-bolt→1/1 MTB Centerlock→1/1 MTB 6-bolt→1/1 Road Centerlock→SOLiX CL→Hydra2 Single Speed 6-bolt, rear only→
Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Industry Nine rim and Industry Nine hub already chosen.
Mountain in depth
Industry Nine Grade 300 Aluminum wheels on Industry Nine Hydra 2 MTB Centerlock hubs
Our mountain pick from the Industry Nine and Industry Nine parts we build with. The Industry Nine Grade 300 Aluminum is a hookless aluminum rim, 30mm inside, 21.5mm deep, about 620 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Industry Nine Hydra 2 MTB Centerlock hubs in 32 hole.
- A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
- Hydra2 reinforced from real use. Industry Nine says feedback from over 100,000 ridden Hydra hubs showed it where to push further. The result is an axle 65 percent thicker, larger bearings and a full-contact seal system.
Start building this pair:
Mountain Bike
Industry Nine rims on Industry Nine hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Industry Nine hub our customers choose most with that rim. The builder offers every Industry Nine hub that fits, and you choose the colors, spokes and the rest.
Industry Nine Grade 300 Aluminum on Industry Nine Hydra 2 MTB Centerlock30mm inside · 21.5mm deep · 32 hole · hooklessStart building this pair →
Industry Nine Sector Aluminum on Industry Nine Hydra 2 MTB Centerlock28.5mm inside · 21.3mm deep · 32 hole · hooklessStart building this pair →
Industry Nine Triad Aluminum on Industry Nine Hydra 2 MTB Centerlock30mm inside · 21.3mm deep · 32 hole · hooklessStart building this pair →More about Industry Nine and Industry Nine wheels
Why the pairing, specs and FAQ
Custom hand built Industry Nine wheels on Industry Nine hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What Industry Nine rims and Industry Nine hubs each bring
- Hollow bead walls. The Sector and Triad are extruded from 6069 aluminum, and all three rims use a hollow bead wall, the part that takes the hit from a rock. Industry Nine says that adds pinch flat protection and impact resistance.
- A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
- One rim for each kind of riding. The Sector is the trail rim at 28.5mm wide inside, the Triad is the enduro rim at 30mm, and the Grade 300 is the downhill and freeride rim at 30mm. All three stay close to 21mm deep, so the choice comes down to how hard you ride.
- Hydra2 reinforced from real use. Industry Nine says feedback from over 100,000 ridden Hydra hubs showed it where to push further. The result is an axle 65 percent thicker, larger bearings and a full-contact seal system.
- Stronger parts around the pawls. Each pawl gains a tooth, for three in all, and the drive ring moves to a more fatigue-resistant steel. Deeper 5.5mm pawl pockets spread force 26 percent better, which Industry Nine says stops them deforming and lets the hub handle powerful e-bike motors.
- SOLiX and continuous phasing. Five pawls work against a 121-tooth drive ring for 605 points of engagement, or 0.59 degrees. Industry Nine says power arrives at once and then loads progressively, in a light hub for cross-country, gravel and road.
Check before you order
- Tires. Every Industry Nine rim on this page is hookless, so choose a tire its maker rates for hookless rims.
Industry Nine and Industry Nine custom wheel questions
Which Industry Nine hub fits my Industry Nine rim?
The cards on this page start on the Industry Nine hub our customers build with each rim most often (Industry Nine Hydra 2 MTB Centerlock). The builder lists every Industry Nine hub that fits your rim, in the drillings and brake types that match.
Do you build Industry Nine rims on other hubs?
Yes. See our Industry Nine custom wheel page for every hub that fits each Industry Nine rim, or our Industry Nine custom wheel page for every rim on an Industry Nine hub.
Can you build with an Industry Nine hub or Industry Nine rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →