Skip to main content

Industry Nine Wheels with SON Hubs

Industry Nine custom wheel built by ProWheelBuilder

Custom Industry Nine Wheels on SON Hubs

Pick an Industry Nine rim we carry, put it on a SON hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Industry Nine rims on SON hubs:

  • Made by specialists: SON hubs made in Tuebingen, Germany
  • Proven: Industry Nine says its downhill and freeride athletes have proven the Grade 300; SON hubs run many tens of thousands of kilometers with no adjustment
  • Built to last: SON backs every hub with a five-year warranty; Industry Nine gives its rims a hollow bead wall for impact resistance
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Grade 300 Aluminum mountain
Read more

Build your custom Industry Nine wheel on SON hubs for:

Or start from a specific SON hub (4)

Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Industry Nine rim and SON hub already chosen.

Where to start

The Industry Nine and SON builds our customers choose most

Mountain

Industry Nine Grade 300 Aluminum wheels on SON 28 Disc 6-bolt hubs

Our mountain pick from the Industry Nine and SON parts we build with. The Industry Nine Grade 300 Aluminum is a hookless aluminum rim, 30mm inside, 21.5mm deep, about 620 grams in 29 inch, sized for about 2.3 to 2.6 inch tires.

Specs and why it works

We lace it to SON 28 Disc 6-bolt hubs (front wheel) in 32 hole.

  • A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
  • A generator tuned to how you ride. The SON 28 is SON's all-purpose choice, with strong output even at low speed, including for charging devices. The SONdelux is lighter with lower mechanical resistance for fast riders and small wheels, and it gives up some output below 20 km/h.

Mountain Bike

Industry Nine rims on SON hubs for mountain bikes

Each card opens our custom wheel builder with the rim and hub for a front wheel already picked, on the SON hub our customers choose most with that rim. The builder offers every SON hub that fits, and you choose the colors, spokes and the rest.

More about Industry Nine and SON wheels

Why the pairing, specs and FAQ

Custom hand built Industry Nine wheels on SON hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Industry Nine rims and SON hubs each bring

  • Hollow bead walls. The Sector and Triad are extruded from 6069 aluminum, and all three rims use a hollow bead wall, the part that takes the hit from a rock. Industry Nine says that adds pinch flat protection and impact resistance.
  • A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
  • One rim for each kind of riding. The Sector is the trail rim at 28.5mm wide inside, the Triad is the enduro rim at 30mm, and the Grade 300 is the downhill and freeride rim at 30mm. All three stay close to 21mm deep, so the choice comes down to how hard you ride.
  • A generator with its coil in the center. SON uses a claw-pole generator with the coil placed centrally and carefully made sheet metal parts, which it says keeps losses low when the lights are off. It works without gears or contact, so SON says the generator itself does not wear.
  • Pressure compensation to keep water out. SON credits this system, which ends in the axle bore, for its protection against water getting in. It is why SON asks you not to grease the skewer shaft and to keep strong jets of water off the hub.
  • Bearings that need nothing from you. SON uses SKF ball bearings sealed on both sides and lubricated for life, which it says run many tens of thousands of kilometers with no adjustment. All SON hubs carry a five-year warranty.

Check before you order

  • Tires. Every Industry Nine rim on this page is hookless, so choose a tire its maker rates for hookless rims.

Industry Nine and SON custom wheel questions

Which SON hub fits my Industry Nine rim?

The cards on this page start on the SON hub our customers build with each rim most often (SON 28 Disc 6-bolt). The builder lists every SON hub that fits your rim, in the drillings and brake types that match.

Do you build Industry Nine rims on other hubs?

Yes. See our Industry Nine custom wheel page for every hub that fits each Industry Nine rim, or our SON custom wheel page for every rim on a SON hub.

Can you build with a SON hub or Industry Nine rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.