There are no products listed under this category.
Industry Nine Wheels with White Industries Hubs
Custom Industry Nine Wheels on White Industries Hubs
Pick an Industry Nine rim we carry, put it on a White Industries hub, and we lace and true the wheel by hand in our Georgia shop.
Why build Industry Nine rims on White Industries hubs:
- Made by specialists: White Industries hubs machined, assembled and inspected in Petaluma, California
- Proven: Industry Nine says its downhill and freeride athletes have proven the Grade 300; White Industries' cassette hub design has stayed basically unchanged since 1992
- Built to last: White Industries stocks parts for older hubs and gives a five-year warranty; Industry Nine gives its rims a hollow bead wall for impact resistance
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Grade 300 Aluminum mountain
Build your custom Industry Nine wheel on White Industries hubs for:
Or start from the White Industries hub you want:
Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Industry Nine rim and White Industries hub already chosen.
Mountain in depth
Industry Nine Grade 300 Aluminum wheels on White Industries CLD hubs
Our mountain pick from the Industry Nine and White Industries parts we build with. The Industry Nine Grade 300 Aluminum is a hookless aluminum rim, 30mm inside, 21.5mm deep, about 620 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to White Industries CLD hubs in 32 hole.
- A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
- Titanium freehub bodies. The T11, CLD, XMR and MI5 rear hubs use a 6/4 titanium freehub body. On the CLD, XMR and MI5, two of the four Enduro cartridge bearings sit in the freehub and two in the 6061-T6 aluminum shell, which White Industries says gives smooth rolling and long life.
Start building this pair:
Mountain Bike
Industry Nine rims on White Industries hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the White Industries hub our customers choose most with that rim. The builder offers every White Industries hub that fits, and you choose the colors, spokes and the rest.
Industry Nine Grade 300 Aluminum on White Industries CLD30mm inside · 21.5mm deep · 32 hole · hooklessStart building this pair →
Industry Nine Sector Aluminum on White Industries CLD28.5mm inside · 21.3mm deep · 32 hole · hooklessStart building this pair →
Industry Nine Triad Aluminum on White Industries CLD30mm inside · 21.3mm deep · 32 hole · hooklessStart building this pair →More about Industry Nine and White Industries wheels
Why the pairing, specs and FAQ
Custom hand built Industry Nine wheels on White Industries hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What Industry Nine rims and White Industries hubs each bring
- Hollow bead walls. The Sector and Triad are extruded from 6069 aluminum, and all three rims use a hollow bead wall, the part that takes the hit from a rock. Industry Nine says that adds pinch flat protection and impact resistance.
- A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
- One rim for each kind of riding. The Sector is the trail rim at 28.5mm wide inside, the Triad is the enduro rim at 30mm, and the Grade 300 is the downhill and freeride rim at 30mm. All three stay close to 21mm deep, so the choice comes down to how hard you ride.
- Titanium freehub bodies. The T11, CLD, XMR and MI5 rear hubs use a 6/4 titanium freehub body. On the CLD, XMR and MI5, two of the four Enduro cartridge bearings sit in the freehub and two in the 6061-T6 aluminum shell, which White Industries says gives smooth rolling and long life.
- Three pawls and a threaded drive ring. Three heat-treated steel pawls on stainless steel leaf springs catch a 48-tooth steel drive ring threaded into the hub shell, for 48 points of engagement, or 7.5 degrees. White Industries says the whole hub is easy to service and rebuild.
- A design with a long record. These hubs descend from the Ti Cassette rear hub of 1992, which White Industries says was the lightest on the market at the time. It says that cassette hub design has stayed basically unchanged for 30 years.
Check before you order
- Tires. Every Industry Nine rim on this page is hookless, so choose a tire its maker rates for hookless rims.
Industry Nine and White Industries custom wheel questions
Which White Industries hub fits my Industry Nine rim?
The cards on this page start on the White Industries hub our customers build with each rim most often (White Industries CLD). The builder lists every White Industries hub that fits your rim, in the drillings and brake types that match.
Do you build Industry Nine rims on other hubs?
Yes. See our Industry Nine custom wheel page for every hub that fits each Industry Nine rim, or our White Industries custom wheel page for every rim on a White Industries hub.
Can you build with a White Industries hub or Industry Nine rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →