There are no products listed under this category.
Industry Nine Wheels with Wolf Tooth Hubs
Custom Industry Nine Wheels on Wolf Tooth Hubs
Pick an Industry Nine rim we carry, put it on a Wolf Tooth hub, and we lace and true the wheel by hand in our Georgia shop.
Why build Industry Nine rims on Wolf Tooth hubs:
- Proven: Industry Nine says its downhill and freeride athletes have proven the Grade 300; Wolf Tooth drives through ENVE's 42mm INNERDRIVE steel ratchet
- Built to last: Wolf Tooth sells every hub part separately and sets bearing preload automatically; Industry Nine gives its rims a hollow bead wall for impact resistance
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Grade 300 Aluminum mountain
Build your custom Industry Nine wheel on Wolf Tooth hubs for:
Or start from the Wolf Tooth hub you want:
Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Industry Nine rim and Wolf Tooth hub already chosen.
Mountain in depth
Industry Nine Grade 300 Aluminum wheels on Wolf Tooth Mountain hubs
Our mountain pick from the Industry Nine and Wolf Tooth parts we build with. The Industry Nine Grade 300 Aluminum is a hookless aluminum rim, 30mm inside, 21.5mm deep, about 620 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Wolf Tooth Mountain hubs (rear wheel) in 32 hole.
- A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
- Engagement you can change. Wolf Tooth sells drive rings with 60, 80 and 100 teeth, which work out to 6, 4.5 and 3.6 degrees of travel before the hub picks up. Fewer teeth favor lower drag, more teeth favor quicker pickup, and the rings swap without special tools.
Start building this pair:
Mountain Bike
Industry Nine rims on Wolf Tooth hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Wolf Tooth hub our customers choose most with that rim. The builder offers every Wolf Tooth hub that fits, and you choose the colors, spokes and the rest.
Industry Nine Grade 300 Aluminum on Wolf Tooth Mountain30mm inside · 21.5mm deep · 32 hole · hookless · rear wheelStart building this pair →
Industry Nine Sector Aluminum on Wolf Tooth Mountain28.5mm inside · 21.3mm deep · 28 hole · hooklessStart building this pair →
Industry Nine Triad Aluminum on Wolf Tooth Mountain30mm inside · 21.3mm deep · 28 hole · hooklessStart building this pair →More about Industry Nine and Wolf Tooth wheels
Why the pairing, specs and FAQ
Custom hand built Industry Nine wheels on Wolf Tooth hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What Industry Nine rims and Wolf Tooth hubs each bring
- Hollow bead walls. The Sector and Triad are extruded from 6069 aluminum, and all three rims use a hollow bead wall, the part that takes the hit from a rock. Industry Nine says that adds pinch flat protection and impact resistance.
- A profile shaped to resist dents. Industry Nine gives the Grade 300 a proprietary profile meant to keep dents at bay and a bead shelf suited to tubeless tires. It says its downhill and freeride athletes have proven the rim.
- One rim for each kind of riding. The Sector is the trail rim at 28.5mm wide inside, the Triad is the enduro rim at 30mm, and the Grade 300 is the downhill and freeride rim at 30mm. All three stay close to 21mm deep, so the choice comes down to how hard you ride.
- A 42mm steel ratchet. Wolf Tooth tried several drive systems and settled on ENVE's INNERDRIVE. It says the large ring diameter lowers the stress on each tooth, so the hub can run more teeth without giving up durability.
- Engagement you can change. Wolf Tooth sells drive rings with 60, 80 and 100 teeth, which work out to 6, 4.5 and 3.6 degrees of travel before the hub picks up. Fewer teeth favor lower drag, more teeth favor quicker pickup, and the rings swap without special tools.
- A low-drag 40T ring for road and gravel. Only the road and gravel hubs take the 40T PRO ring, at 9 degrees. Wolf Tooth reduces its diameter, mills out more material and fits a lighter spring to cut ratchet drag and weight.
Check before you order
- Tires. Every Industry Nine rim on this page is hookless, so choose a tire its maker rates for hookless rims.
Industry Nine and Wolf Tooth custom wheel questions
Which Wolf Tooth hub fits my Industry Nine rim?
The cards on this page start on the Wolf Tooth hub our customers build with each rim most often (Wolf Tooth Mountain). The builder lists every Wolf Tooth hub that fits your rim, in the drillings and brake types that match.
Do you build Industry Nine rims on other hubs?
Yes. See our Industry Nine custom wheel page for every hub that fits each Industry Nine rim, or our Wolf Tooth custom wheel page for every rim on a Wolf Tooth hub.
Can you build with a Wolf Tooth hub or Industry Nine rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →