Nextie Wheels with Industry Nine Hubs

Gravel in depth

Nextie ARX-W 35 wheels on Industry Nine Solix CL hubs

Our gravel pick from the Nextie and Industry Nine parts we build with. The Nextie ARX-W 35 is a hooked carbon rim, 25mm inside, 35mm deep, about 350 grams in 700c, sized for about 35 to 50mm tires. We lace it to Industry Nine Solix CL hubs in 24 hole.

• Test results in public. Nextie publishes lab figures for some rims, including stiffness tables and a spoke hole test. On the Ocean 45G it reports 300 kgf at the spoke holes with no cracks or deformation.
• SOLiX and continuous phasing. Five pawls work against a 121-tooth drive ring for 605 points of engagement, or 0.59 degrees. Industry Nine says power arrives at once and then loads progressively, in a light hub for cross-country, gravel and road.

Start building this pair:

Mountain in depth

Nextie AM 40 wheels on Industry Nine Hydra 2 MTB Centerlock hubs

Our mountain pick from the Nextie and Industry Nine parts we build with. The Nextie AM 40 is a hookless carbon rim, 34mm inside, 32mm deep, about 475 grams in 29 inch, sized for about 2.4 to 2.8 inch tires. We lace it to Industry Nine Hydra 2 MTB Centerlock hubs in 32 hole.

• Carbon and coverage that step up by edition. Standard rims are all T700 with a 2-year warranty, Premium adds T800 with 3 years, and Supreme adds fibers like T1000 with 5 years. Nextie says it tuned these mixes over rounds of testing for impact resistance.
• Hydra2 reinforced from real use. Industry Nine says feedback from over 100,000 ridden Hydra hubs showed it where to push further. The result is an axle 65 percent thicker, larger bearings and a full-contact seal system.

Start building this pair:

Road in depth

Nextie CRX 33 wheels on Industry Nine 1/1 Road hubs

Our road pick from the Nextie and Industry Nine parts we build with. The Nextie CRX 33 is a hooked carbon rim, 21mm inside, 33mm deep, about 335 grams in 700c, sized for about 28 to 38mm tires. We lace it to Industry Nine 1/1 Road hubs in 28 hole.

• The 1/1 keeps it simple. A dual-phase pawl drive gives 90 points of engagement, or 4 degrees, on high-capacity bearings. Conventional flanges and standard J-bend steel spokes mean it can be serviced anywhere, with no proprietary tools.

Start building this pair:

Questions about these builds

Which Nextie rim should I build on Industry Nine hubs?

For gravel, the ARX-W 35 (25mm inside) on Industry Nine Solix CL hubs; for mountain, the AM 40 (34mm inside) on Industry Nine Hydra 2 MTB Centerlock hubs; for road, the CRX 33 (21mm inside) on Industry Nine 1/1 Road hubs. Each one opens the builder from its section above, and the cards below cover every Nextie rim that fits an Industry Nine hub.

Mountain Bike

Nextie rims on Industry Nine hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Industry Nine hub our customers choose most with that rim. The builder offers every Industry Nine hub that fits, and you choose the colors, spokes and the rest.

Nextie AM 40 on Industry Nine Hydra 2 MTB Centerlock34mm inside · 32mm deep · 32 hole · hooklessStart building this pair →Nextie DH 40 on Industry Nine Hydra 2 MTB Centerlock31mm inside · 32mm deep · 32 hole · hooklessStart building this pair →Nextie Omega 36 350G on Industry Nine Hydra 2 MTB Centerlock30mm inside · 23mm deep · 32 hole · hooklessStart building this pair →Nextie Omega 36 390G on Industry Nine Hydra 2 MTB Centerlock30mm inside · 23mm deep · 32 hole · hooklessStart building this pair →Nextie Omega 36U 260G on Industry Nine Hydra 2 MTB Centerlock30mm inside · 23mm deep · 32 hole · hooklessStart building this pair →Nextie Omega 36U 280G on Industry Nine Hydra 2 MTB Centerlock30mm inside · 23mm deep · 32 hole · hooklessStart building this pair →Nextie VM 35 on Industry Nine Hydra 2 MTB Centerlock30mm inside · 25mm deep · 32 hole · hooklessStart building this pair →Nextie XD DH 39 on Industry Nine Hydra 2 MTB Centerlock30mm inside · 25mm deep · 32 hole · hooklessStart building this pair →