There are no products listed under this category.
NOX Composites Wheels with SON Hubs



Custom NOX Composites Wheels on SON Hubs
Pick a NOX Composites rim we carry, put it on a SON hub, and we lace and true the wheel by hand in our Georgia shop.
Why build NOX Composites rims on SON hubs:
- Made by specialists: NOX Composites rims designed and tested in Knoxville, Tennessee, with Toray carbon, on SON hubs made in Tuebingen, Germany
- Proven: NOX thickens the bead with its RockGuard layup against impacts; SON hubs run many tens of thousands of kilometers with no adjustment
- Built to last: SON backs every hub with a five-year warranty; NOX warrants its rims for as long as the original owner has them, with two years of rock strike cover
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Skyline gravel · Teocalli mountain · Falkor 36D road
Build your custom NOX Composites wheel on SON hubs for:
Or start from the SON hub you want:
Or pick one of the 12 ready-made pairs below: each opens our custom wheel builder with the NOX Composites rim and SON hub already chosen.
Gravel in depth
NOX Composites Skyline wheels on SON Delux Disc hubs
Our gravel pick from the NOX Composites and SON parts we build with. The NOX Composites Skyline is a hookless carbon rim, 23mm inside, 22mm deep, about 345 grams in 700c, sized for about 35 to 50mm tires. We lace it to SON Delux Disc hubs (front wheel) in 28 hole.
- Anti-Burp Bump. A slight rise between the center channel and the bead seat helps a tubeless tire seal during setup. Once seated, it resists the bead moving inward, which NOX says makes burping less likely on a bad landing or at low pressure.
- Bearings that need nothing from you. SON uses SKF ball bearings sealed on both sides and lubricated for life, which it says run many tens of thousands of kilometers with no adjustment. All SON hubs carry a five-year warranty.
Start building this pair:
Mountain in depth
NOX Composites Teocalli wheels on SON 28 Disc 6-bolt hubs
Our mountain pick from the NOX Composites and SON parts we build with. The NOX Composites Teocalli is a hookless carbon rim, 26mm inside, 22mm deep, about 385 grams in 29 inch, sized for about 2.1 to 2.4 inch tires. We lace it to SON 28 Disc 6-bolt hubs (front wheel) in 32 hole.
- RockGuard bead. NOX calls the bead the most vulnerable part of a carbon rim, so it adds thickness there and orients the surface fibers to resist impact, and says the layup limits delamination if a crack starts. Its RockGuard HL mountain rims also leave out the bead hook, because forming one creates a weak spot, with a recommended 45 psi limit.
- A generator tuned to how you ride. The SON 28 is SON's all-purpose choice, with strong output even at low speed, including for charging devices. The SONdelux is lighter with lower mechanical resistance for fast riders and small wheels, and it gives up some output below 20 km/h.
Start building this pair:
Road in depth
NOX Composites Falkor 36D wheels on SON Delux Disc hubs
Our road pick from the NOX Composites and SON parts we build with. The NOX Composites Falkor 36D is a hooked carbon rim, 20mm inside, 36mm deep, about 425 grams in 700c, sized for about 25 to 32mm tires. We lace it to SON Delux Disc hubs (front wheel) in 24 hole.
- Rock strike coverage. NOX warrants its rims against defects for as long as the original owner has them. It also has a two-year rock and road strike policy for the rim, though the owner may pay for labor, parts or shipping.
- A generator with its coil in the center. SON uses a claw-pole generator with the coil placed centrally and carefully made sheet metal parts, which it says keeps losses low when the lights are off. It works without gears or contact, so SON says the generator itself does not wear.
Start building this pair:
Questions about these builds
Which NOX Composites rim should I build on SON hubs?
For gravel, the Skyline (23mm inside) on SON Delux Disc hubs; for mountain, the Teocalli (26mm inside) on SON 28 Disc 6-bolt hubs; for road, the Falkor 36D (20mm inside) on SON Delux Disc hubs. Each one opens the builder from its section above, and the cards below cover every NOX Composites rim that fits a SON hub.
Road / Time Trial / Tri
NOX Composites rims on SON hubs for road, time trial and tri bikes
Each card opens our custom wheel builder with the rim and hub for a front wheel already picked, on the SON hub our customers choose most with that rim. The builder offers every SON hub that fits, and you choose the colors, spokes and the rest.
Road / Cross / Gravel
NOX Composites rims on SON hubs for road, cross and gravel bikes
Each card opens our custom wheel builder with the rim and hub for a front wheel already picked, on the SON hub our customers choose most with that rim. The builder offers every SON hub that fits, and you choose the colors, spokes and the rest.
NOX Composites Falkor 36D on SON Delux Disc20mm inside · 36mm deep · 24 hole · hooked · front wheelStart building this pair →
NOX Composites Skyline on SON Delux Disc23mm inside · 22mm deep · 28 hole · hookless · front wheelStart building this pair →
NOX Composites Falkor 55D on SON Delux Disc18mm inside · 55mm deep · 24 hole · hooked · front wheelStart building this pair →
NOX Composites Citico on SON Delux Disc23mm inside · 25mm deep · 24 hole · hooked · front wheelStart building this pair →
NOX Composites Zolder Tubular on SON Delux Disc23mm inside · 27mm deep · 24 hole · front wheelStart building this pair →
Mountain Bike
NOX Composites rims on SON hubs for mountain bikes
Each card opens our custom wheel builder with the rim and hub for a front wheel already picked, on the SON hub our customers choose most with that rim. The builder offers every SON hub that fits, and you choose the colors, spokes and the rest.
NOX Composites Teocalli on SON 28 Disc 6-bolt26mm inside · 22mm deep · 32 hole · hookless · front wheelStart building this pair →
NOX Composites Farlow XC Trail on SON 28 Disc 6-bolt29mm inside · 25mm deep · 32 hole · hookless · front wheelStart building this pair →
NOX Composites Kitsuma Superwide XC Trail on SON 28 Disc 6-bolt36mm inside · 30mm deep · 32 hole · hookless · front wheelStart building this pair →
NOX Composites Farlow Enduro on SON 28 Disc 6-bolt29mm inside · 25mm deep · 32 hole · hookless · front wheelStart building this pair →
NOX Composites Kitsuma Superwide Enduro on SON 28 Disc 6-bolt36mm inside · 30mm deep · 32 hole · hookless · front wheelStart building this pair →More about NOX Composites and SON wheels
Why the pairing, specs and FAQ
Custom hand built NOX Composites wheels on SON hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What NOX Composites rims and SON hubs each bring
- UniWeave layup. NOX stacks two carbon fabrics: woven 3K around the spoke, valve and nipple access holes, and unidirectional fiber for the core strength. NOX says the combination improves strength and durability at a given weight.
- RockGuard bead. NOX calls the bead the most vulnerable part of a carbon rim, so it adds thickness there and orients the surface fibers to resist impact, and says the layup limits delamination if a crack starts. Its RockGuard HL mountain rims also leave out the bead hook, because forming one creates a weak spot, with a recommended 45 psi limit.
- Anti-Burp Bump. A slight rise between the center channel and the bead seat helps a tubeless tire seal during setup. Once seated, it resists the bead moving inward, which NOX says makes burping less likely on a bad landing or at low pressure.
- A generator with its coil in the center. SON uses a claw-pole generator with the coil placed centrally and carefully made sheet metal parts, which it says keeps losses low when the lights are off. It works without gears or contact, so SON says the generator itself does not wear.
- Pressure compensation to keep water out. SON credits this system, which ends in the axle bore, for its protection against water getting in. It is why SON asks you not to grease the skewer shaft and to keep strong jets of water off the hub.
- Bearings that need nothing from you. SON uses SKF ball bearings sealed on both sides and lubricated for life, which it says run many tens of thousands of kilometers with no adjustment. All SON hubs carry a five-year warranty.
Check before you order
- Tires. The Falkor 36R, Falkor 55R, Falkor 36D, Falkor 55D and Citico are hooked; every other NOX Composites rim on this page is hookless, so choose a tire its maker rates for hookless rims.
NOX Composites and SON custom wheel questions
Which SON hub fits my NOX Composites rim?
The cards on this page start on the SON hub our customers build with each rim most often (SON 28, SON Delux Disc, SON 28 Disc 6-bolt). The builder lists every SON hub that fits your rim, in the drillings and brake types that match.
Do you build NOX Composites rims on other hubs?
Yes. See our NOX Composites custom wheel page for every hub that fits each NOX Composites rim, or our SON custom wheel page for every rim on a SON hub.
Can you build with a SON hub or NOX Composites rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →

