Skip to main content

Race Face Wheels with Velo Orange Hubs

The ProWheelBuilder workshop

Custom Race Face Wheels on Velo Orange Hubs

Pick a Race Face rim we carry, put it on a Velo Orange hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Race Face rims on Velo Orange hubs:

  • Proven: Race Face puts its gear under world-class riders on the North Shore before release
  • Built to last: Velo Orange Chronos rears come apart with no tools, so a broken spoke on tour does not end the trip; Race Face replaces a rim broken while riding for life, crashes included
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: ARC Offset 25 gravel · ARC Offset 30 mountain
Read more

Build your custom Race Face wheel on Velo Orange hubs for:

Or start from the Velo Orange hub you want:

Or pick one of the 10 ready-made pairs below: each opens our custom wheel builder with the Race Face rim and Velo Orange hub already chosen.

Gravel in depth

Race Face ARC Offset 25 wheels on Velo Orange Chronos Disc hubs

Our gravel pick from the Race Face and Velo Orange parts we build with. The Race Face ARC Offset 25 is a hooked aluminum rim, 25mm inside, 19.5mm deep, about 450 grams in 700c, sized for about 35 to 50mm tires. We lace it to Velo Orange Chronos Disc hubs in 32 hole.

  • Two aluminum alloys, one set of widths. AR rims are 6061 aluminum and ARC rims are 6069, which Race Face picks for its strength-to-weight ratio. Both come in 25, 30, 35 and 40mm inner widths, so you choose the width for the tire and the alloy separately.
  • A ratchet in place of pawls. Chronos rears use a floating ratchet, which Velo Orange says gives good engagement and handles high torque loads. A 36-tooth ratchet is stock, and Velo Orange sells a 54-tooth replacement for more engagement on technical off-road riding.

Start building this pair:

Mountain in depth

Race Face ARC Offset 30 wheels on Velo Orange Chronos Disc hubs

Our mountain pick from the Race Face and Velo Orange parts we build with. The Race Face ARC Offset 30 is a hooked aluminum rim, 30mm inside, 20.5mm deep, about 525 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Velo Orange Chronos Disc hubs in 32 hole.

  • Offset nipple bed. Race Face moves the nipple bed 4.5mm off center on the AR and ARC rims wider than 25mm and on the ARC Carbon 31 and 36. It says this optimizes spoke tension and makes the wheel stiffer and stronger.
  • Service with no tools. On the Chronos rears the end caps and freehub body come off by hand, so a broken drive side spoke on a long tour does not have to end the trip.

Start building this pair:

Questions about these builds

Which Race Face rim should I build on Velo Orange hubs?

For gravel, the ARC Offset 25 (25mm inside) on Velo Orange Chronos Disc hubs; for mountain, the ARC Offset 30 (30mm inside) on Velo Orange Chronos Disc hubs. Each one opens the builder from its section above, and the cards below cover every Race Face rim that fits a Velo Orange hub.

Road / Cross / Gravel

Race Face rims on Velo Orange hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Velo Orange hub our customers choose most with that rim. The builder offers every Velo Orange hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Race Face rims on Velo Orange hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Velo Orange hub our customers choose most with that rim. The builder offers every Velo Orange hub that fits, and you choose the colors, spokes and the rest.

More about Race Face and Velo Orange wheels

Why the pairing, specs and FAQ

Custom hand built Race Face wheels on Velo Orange hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Race Face rims and Velo Orange hubs each bring

  • Offset nipple bed. Race Face moves the nipple bed 4.5mm off center on the AR and ARC rims wider than 25mm and on the ARC Carbon 31 and 36. It says this optimizes spoke tension and makes the wheel stiffer and stronger.
  • Two aluminum alloys, one set of widths. AR rims are 6061 aluminum and ARC rims are 6069, which Race Face picks for its strength-to-weight ratio. Both come in 25, 30, 35 and 40mm inner widths, so you choose the width for the tire and the alloy separately.
  • Unidirectional carbon on the ARC Carbon. Race Face tunes the unidirectional layup to balance lightness, stiffness and durability. The 31 and 36mm widths cover riding from cross-country to all-mountain.
  • A ratchet in place of pawls. Chronos rears use a floating ratchet, which Velo Orange says gives good engagement and handles high torque loads. A 36-tooth ratchet is stock, and Velo Orange sells a 54-tooth replacement for more engagement on technical off-road riding.
  • Service with no tools. On the Chronos rears the end caps and freehub body come off by hand, so a broken drive side spoke on a long tour does not have to end the trip.
  • High flanges that make room for big bearings. The 58mm flanges leave space for large sealed cartridge bearings. Velo Orange chose this layout for long tours and commuting through grit and rain.

Race Face and Velo Orange custom wheel questions

Which Velo Orange hub fits my Race Face rim?

The cards on this page start on the Velo Orange hub our customers build with each rim most often (Velo Orange Chronos Disc). The builder lists every Velo Orange hub that fits your rim, in the drillings and brake types that match.

Do you build Race Face rims on other hubs?

Yes. See our Race Face custom wheel page for every hub that fits each Race Face rim, or our Velo Orange custom wheel page for every rim on a Velo Orange hub.

Can you build with a Velo Orange hub or Race Face rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.