Race Face Wheels with White Industries Hubs

Gravel in depth

Race Face ARC Offset 25 wheels on White Industries XMR hubs

The gravel pair our customers build most on this page, with 8 in our build records. The Race Face ARC Offset 25 is a hooked aluminum rim, 25mm inside, 19.5mm deep, about 450 grams in 700c, sized for about 35 to 50mm tires. We lace it to White Industries XMR hubs in 32 hole.

• Two aluminum alloys, one set of widths. AR rims are 6061 aluminum and ARC rims are 6069, which Race Face picks for its strength-to-weight ratio. Both come in 25, 30, 35 and 40mm inner widths, so you choose the width for the tire and the alloy separately.
• Titanium freehub bodies. The T11, CLD, XMR and MI5 rear hubs use a 6/4 titanium freehub body. On the CLD, XMR and MI5, two of the four Enduro cartridge bearings sit in the freehub and two in the 6061-T6 aluminum shell, which White Industries says gives smooth rolling and long life.

Start building this pair:

Mountain in depth

Race Face ARC Offset 30 wheels on White Industries XMR hubs

The mountain pair our customers build most on this page, with 9 in our build records. The Race Face ARC Offset 30 is a hooked aluminum rim, 30mm inside, 20.5mm deep, about 525 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to White Industries XMR hubs in 32 hole.

• Offset nipple bed. Race Face moves the nipple bed 4.5mm off center on the AR and ARC rims wider than 25mm and on the ARC Carbon 31 and 36. It says this optimizes spoke tension and makes the wheel stiffer and stronger.
• Three pawls and a threaded drive ring. Three heat-treated steel pawls on stainless steel leaf springs catch a 48-tooth steel drive ring threaded into the hub shell, for 48 points of engagement, or 7.5 degrees. White Industries says the whole hub is easy to service and rebuild.

Start building this pair:

Questions about these builds

Which Race Face rim should I build on White Industries hubs?

For gravel, the ARC Offset 25 (25mm inside) on White Industries XMR hubs; for mountain, the ARC Offset 30 (30mm inside) on White Industries XMR hubs. Each one opens the builder from its section above, and the cards below cover every Race Face rim that fits a White Industries hub.

Mountain Bike

Race Face rims on White Industries hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the White Industries hub our customers choose most with that rim. The builder offers every White Industries hub that fits, and you choose the colors, spokes and the rest.

Race Face ARC Offset 30 on White Industries XMR30mm inside · 20.5mm deep · 32 hole · hookedStart building this pair →Race Face AR Offset 30 on White Industries XMR30mm inside · 19.5mm deep · 32 hole · hookedStart building this pair →Race Face ARC Offset 35 on White Industries XMR35mm inside · 19.5mm deep · 32 hole · hookedStart building this pair →Race Face ARC Offset 40 on White Industries XMR40mm inside · 20mm deep · 32 hole · hookedStart building this pair →Race Face AR Offset 35 on White Industries XMR35mm inside · 19.5mm deep · 32 hole · hookedStart building this pair →Race Face AR Offset 40 on White Industries XMR40mm inside · 20mm deep · 32 hole · hookedStart building this pair →Race Face ARC Offset 31 on White Industries XMR31mm inside · 24mm deep · 32 hole · hookedStart building this pair →Race Face ARC Offset 36 on White Industries XMR36mm inside · 24mm deep · 32 hole · hookedStart building this pair →