There are no products listed under this category.
Spank Wheels with Shimano Hubs



Custom Spank Wheels on Shimano Hubs
Pick a Spank rim we carry, put it on a Shimano hub, and we lace and true the wheel by hand in our Georgia shop.
Why build Spank rims on Shimano hubs:
- Made by specialists: Spank rims made in Spank's own factory, Fratelli Industries
- Proven: Spank's Vibrocore damps trail vibration and raises fatigue life; Shimano builds the same cup-and-cone layout into Dura-Ace on purpose, and its XT and XTR rears engage in 3.5 degrees
- Built to last: Shimano hubs can be serviced at almost any bike shop; Spank shotpeens the surface rather than machining metal away
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Spike Race 33 gravel · 359 Spike Vibracore mountain
Build your custom Spank wheel on Shimano hubs for:
Or start from the Shimano hub you want:
Or pick one of the 5 ready-made pairs below: each opens our custom wheel builder with the Spank rim and Shimano hub already chosen.
Gravel in depth
Spank Spike Race 33 wheels on Shimano 105 R7070 hubs
Our gravel pick from the Spank and Shimano parts we build with. The Spank Spike Race 33 is a hooked aluminum rim, 28mm inside, 22mm deep, sized for about 40mm to 2.2 inch tires. We lace it to Shimano 105 R7070 hubs in 32 hole.
- Bead Bite. This is Spank's patented anti-burp design at the bead. It is there to keep the tire in place and hold pressure, including at lower pressures.
- Cup and cone on the road hubs. Shimano says this construction lets a mechanic fine-tune the bearing and stays smooth under cornering and sprint loads, and that Dura-Ace uses it on purpose. The 105 hubs add internal O-rings and a grease sleeve for durability.
Start building this pair:
Mountain in depth
Spank 359 Spike Vibracore wheels on Shimano XT M8210 B hubs
Our mountain pick from the Spank and Shimano parts we build with. The Spank 359 Spike Vibracore is a hooked aluminum rim, 30.5mm inside, 19mm deep, about 610 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Shimano XT M8210 B hubs in 32 hole.
- Sacred Geometry on the 369. A hollow bead wall improves lateral and vertical strength, Spank says, and its extra width reduces pinch flats and raises impact resistance. The 369 is 39mm outside on the same 30.5mm inner width as the 359.
- Quick engagement off the line. The XT and XTR rears engage within 3.5 degrees. Shimano says that helps you get moving quickly, while the seal design and smooth bearings mean less drag when you coast.
Start building this pair:
Questions about these builds
Which Spank rim should I build on Shimano hubs?
For gravel, the Spike Race 33 (28mm inside) on Shimano 105 R7070 hubs; for mountain, the 359 Spike Vibracore (30.5mm inside) on Shimano XT M8210 B hubs. Each one opens the builder from its section above, and the cards below cover every Spank rim that fits a Shimano hub.
Road / Cross / Gravel
Spank rims on Shimano hubs for road, cross and gravel bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Shimano hub our customers choose most with that rim. The builder offers every Shimano hub that fits, and you choose the colors, spokes and the rest.
Mountain Bike
Spank rims on Shimano hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Shimano hub our customers choose most with that rim. The builder offers every Shimano hub that fits, and you choose the colors, spokes and the rest.
Spank 359 Spike Vibracore on Shimano XT M8210 B30.5mm inside · 19mm deep · 32 hole · hookedStart building this pair →
Spank 359 Spike on Shimano XT M8210 B30.5mm inside · 19mm deep · 32 hole · hookedStart building this pair →
Spank 369 Spike on Shimano XT M8210 B30.5mm inside · 19mm deep · 32 hole · hookedStart building this pair →
Spank 369 Spike Vibracore on Shimano XT M8210 B30.5mm inside · 19mm deep · 32 hole · hookedStart building this pair →More about Spank and Shimano wheels
Why the pairing, specs and FAQ
Custom hand built Spank wheels on Shimano hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What Spank rims and Shimano hubs each bring
- A low, radially compliant section. The 359 and 369 stand 19mm tall and are meant to give a little under load. Spank says that improves traction over bumps and chatter and reduces harsh feedback, while the wide shape holds lateral stiffness.
- Vibrocore in the inner well. On the Vibrocore versions, Spank injects Vibrocore into the rim's inner well. Spank says this cuts vibration reaching the suspension and rider, adds torsional strength and increases fatigue life.
- OohBah rim center. Spank corrugates the center of the rim, which it says adds strength and rigidity. That lets the rim be wider without adding material.
- Cup and cone on the road hubs. Shimano says this construction lets a mechanic fine-tune the bearing and stays smooth under cornering and sprint loads, and that Dura-Ace uses it on purpose. The 105 hubs add internal O-rings and a grease sleeve for durability.
- Cartridge bearings on current XT and XTR. The M8210-B and M9210-B hubs moved to cartridge bearings with preload adjustment, in steel on XT and stainless on XTR. Shimano pairs them with new seals and calls them easily serviceable.
- Quick engagement off the line. The XT and XTR rears engage within 3.5 degrees. Shimano says that helps you get moving quickly, while the seal design and smooth bearings mean less drag when you coast.
Spank and Shimano custom wheel questions
Which Shimano hub fits my Spank rim?
The cards on this page start on the Shimano hub our customers build with each rim most often (Shimano 105 R7070, Shimano XT M8210 B). The builder lists every Shimano hub that fits your rim, in the drillings and brake types that match.
Do you build Spank rims on other hubs?
Yes. See our Spank custom wheel page for every hub that fits each Spank rim, or our Shimano custom wheel page for every rim on a Shimano hub.
Can you build with a Shimano hub or Spank rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →
