Skip to main content

Spank Wheels with Velo Orange Hubs

Custom wheel built by ProWheelBuilder: Hadley MTB Disc Black hubs, Spank Spike Red rims

Custom Spank Wheels on Velo Orange Hubs

Pick a Spank rim we carry, put it on a Velo Orange hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Spank rims on Velo Orange hubs:

  • Made by specialists: Spank rims made in Spank's own factory, Fratelli Industries
  • Proven: Spank's Vibrocore damps trail vibration and raises fatigue life
  • Built to last: Velo Orange Chronos rears come apart with no tools, so a broken spoke on tour does not end the trip; Spank shotpeens the surface rather than machining metal away
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Spike Race 33 gravel · 359 Spike Vibracore mountain
Read more

Build your custom Spank wheel on Velo Orange hubs for:

Or start from the Velo Orange hub you want:

Or pick one of the 5 ready-made pairs below: each opens our custom wheel builder with the Spank rim and Velo Orange hub already chosen.

Gravel in depth

Spank Spike Race 33 wheels on Velo Orange Chronos Disc hubs

Our gravel pick from the Spank and Velo Orange parts we build with. The Spank Spike Race 33 is a hooked aluminum rim, 28mm inside, 22mm deep, sized for about 40mm to 2.2 inch tires. We lace it to Velo Orange Chronos Disc hubs in 32 hole.

  • Bead Bite. This is Spank's patented anti-burp design at the bead. It is there to keep the tire in place and hold pressure, including at lower pressures.
  • A ratchet in place of pawls. Chronos rears use a floating ratchet, which Velo Orange says gives good engagement and handles high torque loads. A 36-tooth ratchet is stock, and Velo Orange sells a 54-tooth replacement for more engagement on technical off-road riding.

Start building this pair:

Mountain in depth

Spank 359 Spike Vibracore wheels on Velo Orange Chronos Disc hubs

Our mountain pick from the Spank and Velo Orange parts we build with. The Spank 359 Spike Vibracore is a hooked aluminum rim, 30.5mm inside, 19mm deep, about 610 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Velo Orange Chronos Disc hubs in 32 hole.

  • Sacred Geometry on the 369. A hollow bead wall improves lateral and vertical strength, Spank says, and its extra width reduces pinch flats and raises impact resistance. The 369 is 39mm outside on the same 30.5mm inner width as the 359.
  • Service with no tools. On the Chronos rears the end caps and freehub body come off by hand, so a broken drive side spoke on a long tour does not have to end the trip.

Start building this pair:

Questions about these builds

Which Spank rim should I build on Velo Orange hubs?

For gravel, the Spike Race 33 (28mm inside) on Velo Orange Chronos Disc hubs; for mountain, the 359 Spike Vibracore (30.5mm inside) on Velo Orange Chronos Disc hubs. Each one opens the builder from its section above, and the cards below cover every Spank rim that fits a Velo Orange hub.

Road / Cross / Gravel

Spank rims on Velo Orange hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Velo Orange hub our customers choose most with that rim. The builder offers every Velo Orange hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Spank rims on Velo Orange hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Velo Orange hub our customers choose most with that rim. The builder offers every Velo Orange hub that fits, and you choose the colors, spokes and the rest.

More about Spank and Velo Orange wheels

Why the pairing, specs and FAQ

Custom hand built Spank wheels on Velo Orange hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Spank rims and Velo Orange hubs each bring

  • A low, radially compliant section. The 359 and 369 stand 19mm tall and are meant to give a little under load. Spank says that improves traction over bumps and chatter and reduces harsh feedback, while the wide shape holds lateral stiffness.
  • Vibrocore in the inner well. On the Vibrocore versions, Spank injects Vibrocore into the rim's inner well. Spank says this cuts vibration reaching the suspension and rider, adds torsional strength and increases fatigue life.
  • OohBah rim center. Spank corrugates the center of the rim, which it says adds strength and rigidity. That lets the rim be wider without adding material.
  • A ratchet in place of pawls. Chronos rears use a floating ratchet, which Velo Orange says gives good engagement and handles high torque loads. A 36-tooth ratchet is stock, and Velo Orange sells a 54-tooth replacement for more engagement on technical off-road riding.
  • Service with no tools. On the Chronos rears the end caps and freehub body come off by hand, so a broken drive side spoke on a long tour does not have to end the trip.
  • High flanges that make room for big bearings. The 58mm flanges leave space for large sealed cartridge bearings. Velo Orange chose this layout for long tours and commuting through grit and rain.

Spank and Velo Orange custom wheel questions

Which Velo Orange hub fits my Spank rim?

The cards on this page start on the Velo Orange hub our customers build with each rim most often (Velo Orange Chronos Disc). The builder lists every Velo Orange hub that fits your rim, in the drillings and brake types that match.

Do you build Spank rims on other hubs?

Yes. See our Spank custom wheel page for every hub that fits each Spank rim, or our Velo Orange custom wheel page for every rim on a Velo Orange hub.

Can you build with a Velo Orange hub or Spank rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.