Skip to main content

Surly Wheels with DT Swiss Hubs

Surly custom wheel built by ProWheelBuilder

Custom Surly Wheels on DT Swiss Hubs

Pick a Surly rim we carry, put it on a DT Swiss hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Surly rims on DT Swiss hubs:

  • Made by specialists: DT Swiss hubs engineered in Biel, Switzerland
  • Proven: Surly built the Clown Royal around the 6.2 inch tire on its own Moonlander; DT Swiss star ratchets engage every tooth at once instead of a few pawls
  • Built to last: DT Swiss freehubs come apart by hand, and the ratchets upgrade to more teeth later
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: My Other Brother Darryl fat bike
Read more

Build your custom Surly wheel on DT Swiss hubs for:

Or start from a specific DT Swiss hub (5)

Or pick one of the 2 ready-made pairs below: each opens our custom wheel builder with the Surly rim and DT Swiss hub already chosen.

Where to start

The Surly and DT Swiss builds our customers choose most

Fat bike

Surly My Other Brother Darryl wheels on DT Swiss 240 Disc Centerlock hubs

Our fat bike pick from the Surly and DT Swiss parts we build with. The Surly My Other Brother Darryl is a hooked aluminum rim, 76.8mm inside, 16.1mm deep, sized for about 3.8 to 5 inch fat bike tires.

Specs and why it works

We lace it to DT Swiss 240 Disc Centerlock hubs in 32 hole.

  • Width that adds float. My Other Brother Darryl is 80mm across the outside. Surly says the wider footprint gives more flotation and traction than a narrower rim.
  • Ratchet EXP on the 240 and 180. One ratchet is combined with the threaded ring, leaving fewer parts and less weight. The drive-side bearing moves into that ring too, which widens the bearing spacing, and DT Swiss says this adds 15 percent axle stiffness and longer bearing life.

Fat Tire / Plus Bike

Surly rims on DT Swiss hubs for fat and plus bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the DT Swiss hub our customers choose most with that rim. The builder offers every DT Swiss hub that fits, and you choose the colors, spokes and the rest.

More about Surly and DT Swiss wheels

Why the pairing, specs and FAQ

Custom hand built Surly wheels on DT Swiss hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Surly rims and DT Swiss hubs each bring

  • Width that adds float. My Other Brother Darryl is 80mm across the outside. Surly says the wider footprint gives more flotation and traction than a narrower rim.
  • A 100mm rim made for one tire. Surly designed the Clown Royal for the 6.2 inch Molenda tire on the Moonlander. It chose a 24 inch diameter to get the most tire volume that frame can hold.
  • Two drilling choices on the Darryl. It comes as a 32-hole symmetric rim, or with Surly's 64-hole Dual pattern, which lets a builder lace a centered wheel or an offset one. Surly lists a 15mm rim center offset.
  • Star ratchets instead of pawls. Facing toothed rings take the drive, and all their teeth engage at the same moment. DT Swiss says a pawl has only a small contact area, while the whole face of its ratchet engages, and it credits the smaller point loads for these hubs' reliability.
  • Ratchet EXP on the 240 and 180. One ratchet is combined with the threaded ring, leaving fewer parts and less weight. The drive-side bearing moves into that ring too, which widens the bearing spacing, and DT Swiss says this adds 15 percent axle stiffness and longer bearing life.
  • The original Ratchet System on the 350. Two conical springs keep both ratchets aligned. DT Swiss calls it marginally heavier than Ratchet EXP, and the hub shell and axle on the current 350 have been reworked to cut weight.

Surly and DT Swiss custom wheel questions

Which DT Swiss hub fits my Surly rim?

The cards on this page start on the DT Swiss hub our customers build with each rim most often (DT Swiss 240 Disc Centerlock). The builder lists every DT Swiss hub that fits your rim, in the drillings and brake types that match.

Do you build Surly rims on other hubs?

Yes. See our Surly custom wheel page for every hub that fits each Surly rim, or our DT Swiss custom wheel page for every rim on a DT Swiss hub.

Can you build with a DT Swiss hub or Surly rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.