Skip to main content

Surly Wheels with SON Hubs

Surly custom wheel built by ProWheelBuilder

Custom Surly Wheels on SON Hubs

Pick a Surly rim we carry, put it on a SON hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Surly rims on SON hubs:

  • Made by specialists: SON hubs made in Tuebingen, Germany
  • Proven: Surly built the Clown Royal around the 6.2 inch tire on its own Moonlander; SON hubs run many tens of thousands of kilometers with no adjustment
  • Built to last: SON backs every hub with a five-year warranty
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: My Other Brother Darryl fat bike
Read more

Build your custom Surly wheel on SON hubs for:

Or start from a specific SON hub (4)

Or pick one of the 2 ready-made pairs below: each opens our custom wheel builder with the Surly rim and SON hub already chosen.

Where to start

The Surly and SON builds our customers choose most

Fat bike

Surly My Other Brother Darryl wheels on SON 28 Fat Bike hubs

Our fat bike pick from the Surly and SON parts we build with. The Surly My Other Brother Darryl is a hooked aluminum rim, 76.8mm inside, 16.1mm deep, sized for about 3.8 to 5 inch fat bike tires.

Specs and why it works

We lace it to SON 28 Fat Bike hubs (front wheel) in 32 hole.

  • Width that adds float. My Other Brother Darryl is 80mm across the outside. Surly says the wider footprint gives more flotation and traction than a narrower rim.
  • Wider flanges on the Wide Body. The standard SONdelux has 50mm flange spacing and the wide body has 68mm, which SON says makes particularly stiff and stable wheels. The wider base gives the spokes a better angle to the rim.

Fat Tire / Plus Bike

Surly rims on SON hubs for fat and plus bikes

Each card opens our custom wheel builder with the rim and hub for a front wheel already picked, on the SON hub our customers choose most with that rim. The builder offers every SON hub that fits, and you choose the colors, spokes and the rest.

More about Surly and SON wheels

Why the pairing, specs and FAQ

Custom hand built Surly wheels on SON hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Surly rims and SON hubs each bring

  • Width that adds float. My Other Brother Darryl is 80mm across the outside. Surly says the wider footprint gives more flotation and traction than a narrower rim.
  • A 100mm rim made for one tire. Surly designed the Clown Royal for the 6.2 inch Molenda tire on the Moonlander. It chose a 24 inch diameter to get the most tire volume that frame can hold.
  • Two drilling choices on the Darryl. It comes as a 32-hole symmetric rim, or with Surly's 64-hole Dual pattern, which lets a builder lace a centered wheel or an offset one. Surly lists a 15mm rim center offset.
  • A generator with its coil in the center. SON uses a claw-pole generator with the coil placed centrally and carefully made sheet metal parts, which it says keeps losses low when the lights are off. It works without gears or contact, so SON says the generator itself does not wear.
  • Pressure compensation to keep water out. SON credits this system, which ends in the axle bore, for its protection against water getting in. It is why SON asks you not to grease the skewer shaft and to keep strong jets of water off the hub.
  • Bearings that need nothing from you. SON uses SKF ball bearings sealed on both sides and lubricated for life, which it says run many tens of thousands of kilometers with no adjustment. All SON hubs carry a five-year warranty.

Surly and SON custom wheel questions

Which SON hub fits my Surly rim?

The cards on this page start on the SON hub our customers build with each rim most often (SON 28 Fat Bike). The builder lists every SON hub that fits your rim, in the drillings and brake types that match.

Do you build Surly rims on other hubs?

Yes. See our Surly custom wheel page for every hub that fits each Surly rim, or our SON custom wheel page for every rim on a SON hub.

Can you build with a SON hub or Surly rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.