Skip to main content

Teravail Wheels with Boyd Hubs

The ProWheelBuilder workshop

Custom Teravail Wheels on Boyd Hubs

Pick a Teravail rim we carry, put it on a Boyd hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Teravail rims on Boyd hubs:

  • Proven: Teravail tests its Fluent mountain rim to ASTM category 3, for trail and all-mountain riding; Boyd's 36-tooth hubs engage every 5 degrees
  • Built to last: Boyd hubs change freehubs by hand and spin on Enduro ABEC-5 bearings; Teravail backs its rims with a lifetime warranty for the original owner
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Circos Carbon gravel · Fluent Carbon mountain
Read more

Build your custom Teravail wheel on Boyd hubs for:

Or start from a specific Boyd hub (1)

Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Teravail rim and Boyd hub already chosen.

Where to start

The Teravail and Boyd builds our customers choose most

Gravel

Teravail Circos Carbon wheels on Boyd Quest hubs

Our gravel pick from the Teravail and Boyd parts we build with. The Teravail Circos Carbon is a hookless carbon rim, 25mm inside, 30mm deep, about 365 grams in 700c, sized for about 35 to 50mm tires.

Specs and why it works

We lace it to Boyd Quest hubs in 24/28 hole.

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Centerlock rotors on the Quest. One central lockring holds the rotor instead of six small bolts. Boyd chose it because the rotor goes on faster and there are no bolts to torque one by one.

Mountain

Teravail Fluent Carbon wheels on Boyd Quest hubs

Our mountain pick from the Teravail and Boyd parts we build with. The Teravail Fluent Carbon is a hookless carbon rim, 30mm inside, 25mm deep, about 450 grams in 29 inch, sized for about 2.3 to 2.6 inch tires.

Specs and why it works

We lace it to Boyd Quest hubs in 28 hole.

  • Reinforced and tested. Teravail reinforces the spoke bed and requires nipple washers in its rims, so we build every Teravail wheel with them. Teravail tests the Fluent to ASTM category 3, the class for trail and all-mountain riding, and says it tested the Circos Wide 32 beyond that.
  • Five degrees of engagement. The 85 Road and the Quest both turn on 36 teeth and engage every 5 degrees. That cuts the dead spot before the drive catches when you start pedaling again, such as coming out of a corner.

Questions about these builds

Which Teravail rim should I build on Boyd hubs?

For gravel, the Circos Carbon (25mm inside) on Boyd Quest hubs; for mountain, the Fluent Carbon (30mm inside) on Boyd Quest hubs. Each one opens the builder from its section above, and the cards below cover every Teravail rim that fits a Boyd hub.

Road / Cross / Gravel

Teravail rims on Boyd hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Boyd hub our customers choose most with that rim. The builder offers every Boyd hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Teravail rims on Boyd hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Boyd hub our customers choose most with that rim. The builder offers every Boyd hub that fits, and you choose the colors, spokes and the rest.

More about Teravail and Boyd wheels

Why the pairing, specs and FAQ

Custom hand built Teravail wheels on Boyd hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Teravail rims and Boyd hubs each bring

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Front and rear drilled differently. Every Teravail rim comes in front-specific and rear-specific versions; the Circos Wide 32 even differs in width, 29mm inside at the front and 28mm at the rear. Teravail sets the drilling of each for better spoke bracing angles, so load passes smoothly from the rim through the nipples and spokes to the hub.
  • A thick hookless flange. Teravail gave the Circos a shallow profile with thick hookless flanges to keep the weight down and let the rim absorb and deflect around impacts. The Fluent's flange is extra thick for singletrack.
  • Five degrees of engagement. The 85 Road and the Quest both turn on 36 teeth and engage every 5 degrees. That cuts the dead spot before the drive catches when you start pedaling again, such as coming out of a corner.
  • Three pawls at a time on the Quest. The Quest has six pawls working in two sets of three on its 36-tooth ring, so three pawls carry the load at each engagement.
  • Tool-free changes. Quest end caps and freehub bodies swap by hand, and the 85 Road offers tool-free service with a swappable freehub. A new frame, axle standard or groupset does not have to mean a new hub.

Check before you order

  • Tires. Every Teravail rim on this page is hookless, so choose a tire its maker rates for hookless rims.

Teravail and Boyd custom wheel questions

Which Boyd hub fits my Teravail rim?

The cards on this page start on the Boyd hub our customers build with each rim most often (Boyd Quest). The builder lists every Boyd hub that fits your rim, in the drillings and brake types that match.

Do you build Teravail rims on other hubs?

Yes. See our Teravail custom wheel page for every hub that fits each Teravail rim, or our Boyd custom wheel page for every rim on a Boyd hub.

Can you build with a Boyd hub or Teravail rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.