Skip to main content

Teravail Wheels with Industry Nine Hubs

The ProWheelBuilder workshop

Custom Teravail Wheels on Industry Nine Hubs

Pick a Teravail rim we carry, put it on an Industry Nine hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Teravail rims on Industry Nine hubs:

  • Made by specialists: Industry Nine hubs machined and anodized in Asheville, North Carolina
  • Proven: Teravail tests its Fluent mountain rim to ASTM category 3, for trail and all-mountain riding; Industry Nine built the Hydra2 from feedback on over 100,000 ridden hubs
  • Built to last: Industry Nine's classic hubs take standard J-bend spokes and service without proprietary tools; Teravail backs its rims with a lifetime warranty for the original owner
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Circos Carbon gravel · Fluent Carbon mountain
Read more

Build your custom Teravail wheel on Industry Nine hubs for:

Or start from a specific Industry Nine hub (7)

Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Teravail rim and Industry Nine hub already chosen.

Where to start

The Teravail and Industry Nine builds our customers choose most

Gravel

Teravail Circos Carbon wheels on Industry Nine 1/1 Road hubs

Our gravel pick from the Teravail and Industry Nine parts we build with. The Teravail Circos Carbon is a hookless carbon rim, 25mm inside, 30mm deep, about 365 grams in 700c, sized for about 35 to 50mm tires.

Specs and why it works

We lace it to Industry Nine 1/1 Road hubs in 28/24 hole.

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • The 1/1 keeps it simple. A dual-phase pawl drive gives 90 points of engagement, or 4 degrees, on high-capacity bearings. Conventional flanges and standard J-bend steel spokes mean it can be serviced anywhere, with no proprietary tools.

Mountain

Teravail Fluent Carbon wheels on Industry Nine Hydra 2 MTB Centerlock hubs

Our mountain pick from the Teravail and Industry Nine parts we build with. The Teravail Fluent Carbon is a hookless carbon rim, 30mm inside, 25mm deep, about 450 grams in 29 inch, sized for about 2.3 to 2.6 inch tires.

Specs and why it works

We lace it to Industry Nine Hydra 2 MTB Centerlock hubs in 32 hole.

  • Reinforced and tested. Teravail reinforces the spoke bed and requires nipple washers in its rims, so we build every Teravail wheel with them. Teravail tests the Fluent to ASTM category 3, the class for trail and all-mountain riding, and says it tested the Circos Wide 32 beyond that.
  • Hydra2 reinforced from real use. Industry Nine says feedback from over 100,000 ridden Hydra hubs showed it where to push further. The result is an axle 65 percent thicker, larger bearings and a full-contact seal system.

Questions about these builds

Which Teravail rim should I build on Industry Nine hubs?

For gravel, the Circos Carbon (25mm inside) on Industry Nine 1/1 Road hubs; for mountain, the Fluent Carbon (30mm inside) on Industry Nine Hydra 2 MTB Centerlock hubs. Each one opens the builder from its section above, and the cards below cover every Teravail rim that fits an Industry Nine hub.

Road / Cross / Gravel

Teravail rims on Industry Nine hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Industry Nine hub our customers choose most with that rim. The builder offers every Industry Nine hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Teravail rims on Industry Nine hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Industry Nine hub our customers choose most with that rim. The builder offers every Industry Nine hub that fits, and you choose the colors, spokes and the rest.

More about Teravail and Industry Nine wheels

Why the pairing, specs and FAQ

Custom hand built Teravail wheels on Industry Nine hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Teravail rims and Industry Nine hubs each bring

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Front and rear drilled differently. Every Teravail rim comes in front-specific and rear-specific versions; the Circos Wide 32 even differs in width, 29mm inside at the front and 28mm at the rear. Teravail sets the drilling of each for better spoke bracing angles, so load passes smoothly from the rim through the nipples and spokes to the hub.
  • A thick hookless flange. Teravail gave the Circos a shallow profile with thick hookless flanges to keep the weight down and let the rim absorb and deflect around impacts. The Fluent's flange is extra thick for singletrack.
  • Hydra2 reinforced from real use. Industry Nine says feedback from over 100,000 ridden Hydra hubs showed it where to push further. The result is an axle 65 percent thicker, larger bearings and a full-contact seal system.
  • Stronger parts around the pawls. Each pawl gains a tooth, for three in all, and the drive ring moves to a more fatigue-resistant steel. Deeper 5.5mm pawl pockets spread force 26 percent better, which Industry Nine says stops them deforming and lets the hub handle powerful e-bike motors.
  • SOLiX and continuous phasing. Five pawls work against a 121-tooth drive ring for 605 points of engagement, or 0.59 degrees. Industry Nine says power arrives at once and then loads progressively, in a light hub for cross-country, gravel and road.

Check before you order

  • Tires. Every Teravail rim on this page is hookless, so choose a tire its maker rates for hookless rims.

Teravail and Industry Nine custom wheel questions

Which Industry Nine hub fits my Teravail rim?

The cards on this page start on the Industry Nine hub our customers build with each rim most often (Industry Nine 1/1 Road, Industry Nine Hydra 2 MTB Centerlock). The builder lists every Industry Nine hub that fits your rim, in the drillings and brake types that match.

Do you build Teravail rims on other hubs?

Yes. See our Teravail custom wheel page for every hub that fits each Teravail rim, or our Industry Nine custom wheel page for every rim on an Industry Nine hub.

Can you build with an Industry Nine hub or Teravail rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.