Skip to main content

Teravail Wheels with Shimano Hubs

The ProWheelBuilder workshop

Custom Teravail Wheels on Shimano Hubs

Pick a Teravail rim we carry, put it on a Shimano hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Teravail rims on Shimano hubs:

  • Proven: Teravail tests its Fluent mountain rim to ASTM category 3, for trail and all-mountain riding; Shimano builds the same cup-and-cone layout into Dura-Ace on purpose, and its XT and XTR rears engage in 3.5 degrees
  • Built to last: Shimano hubs can be serviced at almost any bike shop; Teravail backs its rims with a lifetime warranty for the original owner
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Circos Carbon gravel · Fluent Carbon mountain
Read more

Build your custom Teravail wheel on Shimano hubs for:

Or start from a specific Shimano hub (11)

Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the Teravail rim and Shimano hub already chosen.

Where to start

The Teravail and Shimano builds our customers choose most

Gravel

Teravail Circos Carbon wheels on Shimano XT M8210 B hubs

Our gravel pick from the Teravail and Shimano parts we build with. The Teravail Circos Carbon is a hookless carbon rim, 25mm inside, 30mm deep, about 365 grams in 700c, sized for about 35 to 50mm tires.

Specs and why it works

We lace it to Shimano XT M8210 B hubs in 28 hole.

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Cartridge bearings on current XT and XTR. The M8210-B and M9210-B hubs moved to cartridge bearings with preload adjustment, in steel on XT and stainless on XTR. Shimano pairs them with new seals and calls them easily serviceable.

Mountain

Teravail Fluent Carbon wheels on Shimano XT M8210 B hubs

Our mountain pick from the Teravail and Shimano parts we build with. The Teravail Fluent Carbon is a hookless carbon rim, 30mm inside, 25mm deep, about 450 grams in 29 inch, sized for about 2.3 to 2.6 inch tires.

Specs and why it works

We lace it to Shimano XT M8210 B hubs in 32 hole.

  • Reinforced and tested. Teravail reinforces the spoke bed and requires nipple washers in its rims, so we build every Teravail wheel with them. Teravail tests the Fluent to ASTM category 3, the class for trail and all-mountain riding, and says it tested the Circos Wide 32 beyond that.
  • Quick engagement off the line. The XT and XTR rears engage within 3.5 degrees. Shimano says that helps you get moving quickly, while the seal design and smooth bearings mean less drag when you coast.

Questions about these builds

Which Teravail rim should I build on Shimano hubs?

For gravel, the Circos Carbon (25mm inside) on Shimano XT M8210 B hubs; for mountain, the Fluent Carbon (30mm inside) on Shimano XT M8210 B hubs. Each one opens the builder from its section above, and the cards below cover every Teravail rim that fits a Shimano hub.

Road / Cross / Gravel

Teravail rims on Shimano hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Shimano hub our customers choose most with that rim. The builder offers every Shimano hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Teravail rims on Shimano hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Shimano hub our customers choose most with that rim. The builder offers every Shimano hub that fits, and you choose the colors, spokes and the rest.

More about Teravail and Shimano wheels

Why the pairing, specs and FAQ

Custom hand built Teravail wheels on Shimano hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Teravail rims and Shimano hubs each bring

  • Rims designed around the tires. Teravail started as a tire brand and designed its rims to pair with its own tires, so tire installation, tubeless setup and ride feel stay consistent. It recommends its own tubeless tape: one layer 27mm wide on the Circos, one layer 33mm wide on the Fluent, two layers 33mm wide on the Circos Wide 32.
  • Front and rear drilled differently. Every Teravail rim comes in front-specific and rear-specific versions; the Circos Wide 32 even differs in width, 29mm inside at the front and 28mm at the rear. Teravail sets the drilling of each for better spoke bracing angles, so load passes smoothly from the rim through the nipples and spokes to the hub.
  • A thick hookless flange. Teravail gave the Circos a shallow profile with thick hookless flanges to keep the weight down and let the rim absorb and deflect around impacts. The Fluent's flange is extra thick for singletrack.
  • Cup and cone on the road hubs. Shimano says this construction lets a mechanic fine-tune the bearing and stays smooth under cornering and sprint loads, and that Dura-Ace uses it on purpose. The 105 hubs add internal O-rings and a grease sleeve for durability.
  • Cartridge bearings on current XT and XTR. The M8210-B and M9210-B hubs moved to cartridge bearings with preload adjustment, in steel on XT and stainless on XTR. Shimano pairs them with new seals and calls them easily serviceable.
  • Quick engagement off the line. The XT and XTR rears engage within 3.5 degrees. Shimano says that helps you get moving quickly, while the seal design and smooth bearings mean less drag when you coast.

Check before you order

  • Tires. Every Teravail rim on this page is hookless, so choose a tire its maker rates for hookless rims.

Teravail and Shimano custom wheel questions

Which Shimano hub fits my Teravail rim?

The cards on this page start on the Shimano hub our customers build with each rim most often (Shimano XT M8210 B, Shimano 105 R7070). The builder lists every Shimano hub that fits your rim, in the drillings and brake types that match.

Do you build Teravail rims on other hubs?

Yes. See our Teravail custom wheel page for every hub that fits each Teravail rim, or our Shimano custom wheel page for every rim on a Shimano hub.

Can you build with a Shimano hub or Teravail rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.