Skip to main content

Velocity Wheels with Onyx Hubs

Custom wheel built by ProWheelBuilder: DT 240 Black hubs, Velocity A23 MSW Black rims

Custom Velocity Wheels on Onyx Hubs

Pick a Velocity rim we carry, put it on an Onyx hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Velocity rims on Onyx hubs:

  • American made and matched: Velocity rims rolled, drilled and anodized in Grand Rapids, Michigan, on Onyx hubs machined in Minnesota
  • Proven: Velocity rates every rim on a published scale from Featherweight to Strongest; Onyx drives through a sprag clutch, with no teeth to skip
  • Built to last: Onyx hubs coast silently, with no pawls to wear; Velocity anodizes color into the metal, so it won't chip or peel
  • More than 50 Velocity wheels on Onyx hubs in our build records since 2009, each laced and trued by hand in Georgia
  • In depth below: Cliffhanger gravel · Blunt 35 mountain · Chukker road
Read more

Build your custom Velocity wheel on Onyx hubs for:

Or start from the Onyx hub you want:

Or pick one of the 15 ready-made pairs below: each opens our custom wheel builder with the Velocity rim and Onyx hub already chosen.

Gravel in depth

Velocity Cliffhanger wheels on Onyx MTB Centerlock hubs

The gravel pair our customers build most on this page, with 8 in our build records. The Velocity Cliffhanger is a hooked aluminum rim, 25mm inside, 21.6mm deep, about 675 grams in 700c, sized for about 35 to 50mm tires. We lace it to Onyx MTB Centerlock hubs in 28 hole.

  • Tubeless only where it is designed in. Rims listed as tubeless ready have tight tolerances at the bead and call for thin Velotape. Velocity says any rim not listed that way must run tubes, so check the model before you pick a tire setup.
  • Power that does not wait for a tooth. Onyx says the hub carries your pedaling to the rear wheel instantly, for faster acceleration and more control. There is no gap between teeth to cross before it picks up.

Start building this pair:

Mountain in depth

Velocity Blunt 35 wheels on Onyx MTB Centerlock hubs

Our mountain pick from the Velocity and Onyx parts we build with. The Velocity Blunt 35 is a hooked aluminum rim, 30.2mm inside, 22mm deep, about 590 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Onyx MTB Centerlock hubs in 32 hole.

  • Spoke holes angled for the lacing. Holes are drilled at about 4 degrees and alternate between the left and right flange, so each nipple points closer to where its spoke is headed. The Atlas is the only rim Velocity eyelets.
  • A weight trade-off. These hubs are heavier than pawl hubs, so they suit riders who want the engagement and the silence enough to carry the extra grams.

Start building this pair:

Road in depth

Velocity Chukker wheels on Onyx MTB Centerlock hubs

Our road pick from the Velocity and Onyx parts we build with. The Velocity Chukker is a hooked aluminum rim, 18.8mm inside, 32mm deep, about 640 grams in 700c, sized for about 25 to 32mm tires. We lace it to Onyx MTB Centerlock hubs in 28 hole.

  • A published chart of sizes and strength. Velocity's model matrix runs from 16 inch to 32 inch and rates each rim from Featherweight to Strongest with an optimal tire width, which makes rims easy to compare. The builder shows which sizes we offer for each rim.
  • Bearings chosen for low drag. Onyx fits premium-grade bearings front and rear, and credits them with very low rolling resistance on both wheels.

Start building this pair:

Questions about these builds

Which Velocity rim should I build on Onyx hubs?

For gravel, the Cliffhanger (25mm inside) on Onyx MTB Centerlock hubs; for mountain, the Blunt 35 (30.2mm inside) on Onyx MTB Centerlock hubs; for road, the Chukker (18.8mm inside) on Onyx MTB Centerlock hubs. Each one opens the builder from its section above, and the cards below cover every Velocity rim that fits an Onyx hub.

Road / Time Trial / Tri

Velocity rims on Onyx hubs for road, time trial and tri bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Onyx hub our customers choose most with that rim. The builder offers every Onyx hub that fits, and you choose the colors, spokes and the rest.

Road / Cross / Gravel

Velocity rims on Onyx hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Onyx hub our customers choose most with that rim. The builder offers every Onyx hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Velocity rims on Onyx hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Onyx hub our customers choose most with that rim. The builder offers every Onyx hub that fits, and you choose the colors, spokes and the rest.

More about Velocity and Onyx wheels

Why the pairing, specs and FAQ

Custom hand built Velocity wheels on Onyx hubs

Our order records show more than 50 Velocity wheels laced to Onyx hubs since 2009. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Velocity rims and Onyx hubs each bring

  • Rolled, drilled and anodized in Grand Rapids, Michigan. Velocity moved all production there in 2016. It buys its extrusion from a supplier in Arizona and does the rolling, drilling and finishing itself.
  • Color grown into the metal. Velocity anodizes its rims in house. The process forms a hard oxide layer that is part of the aluminum rather than a coating on top, so Velocity says it won't chip or peel.
  • Spoke holes angled for the lacing. Holes are drilled at about 4 degrees and alternate between the left and right flange, so each nipple points closer to where its spoke is headed. The Atlas is the only rim Velocity eyelets.
  • A patented sprag clutch instead of pawls. Onyx hubs drive through a sprag clutch, not pawls and a toothed ring. With no teeth in the drive, there are none to skip.
  • Power that does not wait for a tooth. Onyx says the hub carries your pedaling to the rear wheel instantly, for faster acceleration and more control. There is no gap between teeth to cross before it picks up.
  • Silent coasting. Taking out the pawls also takes out the sound they make against the teeth, and removes the play that comes with them. The wheel coasts quietly.

Velocity and Onyx custom wheel questions

Which Onyx hub fits my Velocity rim?

The cards on this page start on the Onyx hub our customers build with each rim most often (Onyx Vesper Road, Onyx MTB Centerlock, Onyx Vesper SS 6-bolt). The builder lists every Onyx hub that fits your rim, in the drillings and brake types that match.

Do you build Velocity rims on other hubs?

Yes. See our Velocity custom wheel page for every hub that fits each Velocity rim, or our Onyx custom wheel page for every rim on an Onyx hub.

Can you build with an Onyx hub or Velocity rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.