Convergence We Are 1 Wheels with Bitex Hubs

Gravel in depth

Convergence We Are 1 Wanderer Carbon wheels on Bitex BX 211 hubs

Our gravel pick from the Convergence We Are 1 and Bitex parts we build with. The Convergence We Are 1 Wanderer Carbon is a hookless carbon rim, 27mm inside, 21mm deep, about 440 grams in 700c, sized for about 40mm to 2.2 inch tires. We lace it to Bitex BX 211 hubs in 32 hole.

• A layup for each discipline. The Whisp, Sector, Triad, Deal, Fuse, Revive and Wanderer are separate rims for XC, trail, enduro, downhill, e-bike, gravel and bikepacking. Each is tuned for its own job rather than adapted from a single design.
• Axle ends that convert. Bitex lists quick release and 12mm thru-axle options on models like the MTR, and shows the axle and end cap changes in its videos. If your next frame uses a different standard, the wheel may be able to follow it.

Start building this pair:

Mountain in depth

Convergence We Are 1 Coup Carbon wheels on Bitex BX 211 hubs

Our mountain pick from the Convergence We Are 1 and Bitex parts we build with. The Convergence We Are 1 Coup Carbon is a hookless carbon rim, 21mm deep. We lace it to Bitex BX 211 hubs in 32 hole.

• A wave-shaped rim wall. Convergence rims alternate faces angled 7.5 degrees on mountain models and 6 degrees on gravel and bikepacking models, so each nipple bed points straight at its hub flange. WR1 says this gives a straight spoke line and full contact around the nipple, so no one point takes the load.
• Six pawls in two sets. Bitex's patented freehub splits its pawls into two groups of three that take turns meeting the ratchet teeth, so the gap between engagement points is half what it would be. The company says the larger pawls also carry more load.

Start building this pair:

Questions about these builds

Which Convergence We Are 1 rim should I build on Bitex hubs?

For gravel, the Wanderer Carbon (27mm inside) on Bitex BX 211 hubs; for mountain, the Coup Carbon on Bitex BX 211 hubs. Each one opens the builder from its section above, and the cards below cover every Convergence We Are 1 rim that fits a Bitex hub.

Mountain Bike

Convergence We Are 1 rims on Bitex hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Bitex hub our customers choose most with that rim. The builder offers every Bitex hub that fits, and you choose the colors, spokes and the rest.

Convergence We Are 1 Coup Carbon on Bitex BX 21121mm deep · 32 hole · hooklessStart building this pair →Convergence We Are 1 Deal Carbon on Bitex BX 21129mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →Convergence We Are 1 Fuse Carbon on Bitex BX 21133mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →Convergence We Are 1 Hush 32 Carbon on Bitex BX 21126mm deep · 24 hole · hooklessStart building this pair →Convergence We Are 1 Sector Carbon on Bitex BX 21129mm inside · 21mm deep · 32 hole · hooklessStart building this pair →Convergence We Are 1 Triad Carbon on Bitex BX 21130mm inside · 18.5mm deep · 32 hole · hooklessStart building this pair →