Skip to main content

Chromag Wheels with Velo Orange Hubs

The ProWheelBuilder workshop

Custom Chromag Wheels on Velo Orange Hubs

Pick a Chromag rim we carry, put it on a Velo Orange hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Chromag rims on Velo Orange hubs:

  • Proven: Chromag says the BA30 v2 takes 20 percent more impact than the original at the same weight
  • Built to last: Velo Orange Chronos rears come apart with no tools, so a broken spoke on tour does not end the trip; Chromag welds and grinds the seam so the joint is the strongest part of the rim
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: BA30 V2 mountain
Read more

Build your custom Chromag wheel on Velo Orange hubs for:

Or start from a specific Velo Orange hub (1)

Or pick one of the 2 ready-made pairs below: each opens our custom wheel builder with the Chromag rim and Velo Orange hub already chosen.

Where to start

The Chromag and Velo Orange builds our customers choose most

Mountain

Chromag BA30 V2 wheels on Velo Orange Chronos Disc hubs

Our mountain pick from the Chromag and Velo Orange parts we build with. The Chromag BA30 V2 is a hooked aluminum rim, 30mm inside, 19mm deep, about 640 grams in 29 inch, sized for about 2.3 to 2.6 inch tires.

Specs and why it works

We lace it to Velo Orange Chronos Disc hubs in 32 hole.

  • A bead wall built for rock strikes. Chromag concentrates material in the bead wall, where impacts land, and rounds the outer edge to reduce tire damage under compression. The aim is better dent resistance and tire retention, and fewer pinch flats.
  • A ratchet in place of pawls. Chronos rears use a floating ratchet, which Velo Orange says gives good engagement and handles high torque loads. A 36-tooth ratchet is stock, and Velo Orange sells a 54-tooth replacement for more engagement on technical off-road riding.

Mountain Bike

Chromag rims on Velo Orange hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Velo Orange hub our customers choose most with that rim. The builder offers every Velo Orange hub that fits, and you choose the colors, spokes and the rest.

More about Chromag and Velo Orange wheels

Why the pairing, specs and FAQ

Custom hand built Chromag wheels on Velo Orange hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Chromag rims and Velo Orange hubs each bring

  • A bead wall built for rock strikes. Chromag concentrates material in the bead wall, where impacts land, and rounds the outer edge to reduce tire damage under compression. The aim is better dent resistance and tire retention, and fewer pinch flats.
  • A welded and ground seam. Both rims are fusion welded at the joint and then ground smooth, and Chromag says that makes the seam the strongest part of the rim. A full weld also keeps the joint airtight for tubeless.
  • Nipple beds angled to the spoke. Chromag's oriented bed lines up each nipple seat with the angle of its spoke. Chromag says this reduces stress on the nipple and spoke, which makes for a stronger wheel.
  • A ratchet in place of pawls. Chronos rears use a floating ratchet, which Velo Orange says gives good engagement and handles high torque loads. A 36-tooth ratchet is stock, and Velo Orange sells a 54-tooth replacement for more engagement on technical off-road riding.
  • Service with no tools. On the Chronos rears the end caps and freehub body come off by hand, so a broken drive side spoke on a long tour does not have to end the trip.
  • High flanges that make room for big bearings. The 58mm flanges leave space for large sealed cartridge bearings. Velo Orange chose this layout for long tours and commuting through grit and rain.

Chromag and Velo Orange custom wheel questions

Which Velo Orange hub fits my Chromag rim?

The cards on this page start on the Velo Orange hub our customers build with each rim most often (Velo Orange Chronos Disc). The builder lists every Velo Orange hub that fits your rim, in the drillings and brake types that match.

Do you build Chromag rims on other hubs?

Yes. See our Chromag custom wheel page for every hub that fits each Chromag rim, or our Velo Orange custom wheel page for every rim on a Velo Orange hub.

Can you build with a Velo Orange hub or Chromag rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.