ENVE Wheels with Hope Hubs

Gravel in depth

ENVE SES 3.4 wheels on Hope Pro 5 Centerlock hubs

Our gravel pick from the ENVE and Hope parts we build with. The ENVE SES 3.4 is a hookless carbon rim, 25mm inside, 39mm deep, about 370 grams in 700c, sized for about 35 to 50mm tires. We lace it to Hope Pro 5 Centerlock hubs in 24 hole.

• Drag cut at the seal and the ratchet. Hope says the Pro 5's labyrinth seal keeps dirt out with zero drag. On the road, the RS4 rear goes a different way, with a reduced-drag two-pawl ratchet at 44 points, or 8 degrees.

Start building this pair:

Mountain in depth

ENVE M5 Pro wheels on Hope Pro 5 Centerlock hubs

Our mountain pick from the ENVE and Hope parts we build with. The ENVE M5 Pro is a hookless carbon rim, 29mm inside, 20mm deep, about 345 grams in 29 inch, sized for about 2.3 to 2.6 inch tires. We lace it to Hope Pro 5 Centerlock hubs in 24 hole.

• M Series front and rear rims do different jobs. On models like the M6, the front rim runs wider for more tire support, lower pressure and more traction, with a narrower edge to save weight. The rear gets a wider edge for pinch-flat and impact protection, because ENVE says that is where damage is more likely.
• Spacers that change with your bike. End spacers swap to suit a different frame or axle, so the hub can move to your next bike. Hope publishes a conversion kit chart, and the Pro 5 front covers QR, 9mm, 12mm, 15mm, 20mm, Torq and Boost.

Start building this pair:

Road in depth

ENVE SES 2.3 wheels on Hope Pro 5 Centerlock hubs

Our road pick from the ENVE and Hope parts we build with. The ENVE SES 2.3 is a hookless carbon rim, 21mm inside, 28mm deep, about 275 grams in 700c, sized for about 28 to 38mm tires. We lace it to Hope Pro 5 Centerlock hubs in 24 hole.

• Molded spoke holes. ENVE forms its spoke and valve holes in the mold instead of drilling them, so the carbon fibers stay uncut. Drilled carbon needs extra material to restore its strength, and ENVE says skipping that saves weight without giving up durability or stiffness.
• A stiffer axle and shell. Hope says the step-down axle makes the Pro 5 freehub stiffer and more durable. The front hub shell is machined from a single forged billet, with a larger flange for a stiffer wheel.

Start building this pair:

Questions about these builds

Which ENVE rim should I build on Hope hubs?

For gravel, the SES 3.4 (25mm inside) on Hope Pro 5 Centerlock hubs; for mountain, the M5 Pro (29mm inside) on Hope Pro 5 Centerlock hubs; for road, the SES 2.3 (21mm inside) on Hope Pro 5 Centerlock hubs. Each one opens the builder from its section above, and the cards below cover every ENVE rim that fits a Hope hub.

Mountain Bike

ENVE rims on Hope hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Hope hub our customers choose most with that rim. The builder offers every Hope hub that fits, and you choose the colors, spokes and the rest.

ENVE M5 Pro on Hope Pro 5 Centerlock29/27mm inside · 20mm deep · 24 hole · hooklessStart building this pair →ENVE M6 on Hope Pro 5 Centerlock32/29mm inside · 21mm deep · 28 hole · hooklessStart building this pair →ENVE AM30 on Hope Pro 5 Centerlock30mm inside · 20mm deep · 28 hole · hooklessStart building this pair →ENVE M8 on Hope Pro 5 Centerlock32/29mm inside · 20.9/21mm deep · 28/32 hole · hooklessStart building this pair →ENVE M9 Pro on Hope Pro 5 Centerlock29mm inside · 22mm deep · 32 hole · hooklessStart building this pair →