There are no products listed under this category.
PWB Wheels with Industry Nine Hubs
Custom PWB Wheels on Industry Nine Hubs
Pick a PWB rim we carry, put it on an Industry Nine hub, and we lace and true the wheel by hand in our Georgia shop.
Why build PWB rims on Industry Nine hubs:
- Made by specialists: Industry Nine hubs machined and anodized in Asheville, North Carolina
- Proven: we chose each PWB rim after building a lot of wheels on it; Industry Nine built the Hydra2 from feedback on over 100,000 ridden hubs
- Built to last: Industry Nine's classic hubs take standard J-bend spokes and service without proprietary tools
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: Terra I22 Carbon road
Build your custom PWB wheel on Industry Nine hubs for:
Or start from the Industry Nine hub you want:
Or pick one of the 3 ready-made pairs below: each opens our custom wheel builder with the PWB rim and Industry Nine hub already chosen.
Road in depth
PWB Terra I22 Carbon wheels on Industry Nine 1/1 Road hubs
Our road pick from the PWB and Industry Nine parts we build with. The PWB Terra I22 Carbon is a hookless carbon rim, 22mm inside, 25mm deep, about 365 grams in 700c, sized for about 28 to 38mm tires. We lace it to Industry Nine 1/1 Road hubs in 28 hole.
- One 45mm road depth, three widths. Every Ventus is 45mm deep, the depth we picked to balance aero, weight and crosswind manners. The 45C is 17mm inside, the 45CD is 18mm for 25 to 32mm tires, and the 45CDW is 22mm for 28 to 35mm tires.
- The 1/1 keeps it simple. A dual-phase pawl drive gives 90 points of engagement, or 4 degrees, on high-capacity bearings. Conventional flanges and standard J-bend steel spokes mean it can be serviced anywhere, with no proprietary tools.
Start building this pair:
Road / Cross / Gravel
PWB rims on Industry Nine hubs for road, cross and gravel bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Industry Nine hub our customers choose most with that rim. The builder offers every Industry Nine hub that fits, and you choose the colors, spokes and the rest.
PWB Terra I22 Carbon on Industry Nine 1/1 Road22mm inside · 25mm deep · 28 hole · hooklessStart building this pair →
PWB Ventus 45CDW Carbon on Industry Nine Solix CL22mm inside · 45mm deep · 24 hole · hooklessStart building this pair →
PWB Ventus 45CD Carbon on Industry Nine Solix CL18mm inside · 45mm deep · 24 hole · hookedStart building this pair →More about PWB and Industry Nine wheels
Why the pairing, specs and FAQ
Custom hand built PWB wheels on Industry Nine hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What PWB rims and Industry Nine hubs each bring
- Chosen by the people who build with them. We do not manufacture these rims. We specify them, test them and put our name on them after building a lot of wheels of each type, and we build them into finished wheels here.
- One 45mm road depth, three widths. Every Ventus is 45mm deep, the depth we picked to balance aero, weight and crosswind manners. The 45C is 17mm inside, the 45CD is 18mm for 25 to 32mm tires, and the 45CDW is 22mm for 28 to 35mm tires.
- Shaped for the tire on it. The Ventus section is wide at the bead so a 28mm tire flows into the rim, and rounded so the airflow stays attached in a gust. That is what keeps the wheel calm in a crosswind.
- Hydra2 reinforced from real use. Industry Nine says feedback from over 100,000 ridden Hydra hubs showed it where to push further. The result is an axle 65 percent thicker, larger bearings and a full-contact seal system.
- Stronger parts around the pawls. Each pawl gains a tooth, for three in all, and the drive ring moves to a more fatigue-resistant steel. Deeper 5.5mm pawl pockets spread force 26 percent better, which Industry Nine says stops them deforming and lets the hub handle powerful e-bike motors.
- SOLiX and continuous phasing. Five pawls work against a 121-tooth drive ring for 605 points of engagement, or 0.59 degrees. Industry Nine says power arrives at once and then loads progressively, in a light hub for cross-country, gravel and road.
Check before you order
- Tires. The Ventus 45CD Carbon is hooked; every other PWB rim on this page is hookless, so choose a tire its maker rates for hookless rims.
PWB and Industry Nine custom wheel questions
Which Industry Nine hub fits my PWB rim?
The cards on this page start on the Industry Nine hub our customers build with each rim most often (Industry Nine 1/1 Road, Industry Nine Solix CL). The builder lists every Industry Nine hub that fits your rim, in the drillings and brake types that match.
Do you build PWB rims on other hubs?
Yes. See our PWB custom wheel page for every hub that fits each PWB rim, or our Industry Nine custom wheel page for every rim on an Industry Nine hub.
Can you build with an Industry Nine hub or PWB rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →