
Custom Velocity Wheels on DT Swiss Hubs
Pick a Velocity rim we carry, put it on a DT Swiss hub, and we lace and true the wheel by hand in our Georgia shop.
Why build Velocity rims on DT Swiss hubs:
- Michigan-made Velocity rims on Swiss-engineered DT Swiss hubs, for gravel, trail and road
- Teeth, not pawls: all 36 ratchet teeth engage at once, upgradeable later, and the freehub pulls off by hand
- More than 180 of these wheels in our build records since 2009
- In depth below: Cliffhanger gravel · Blunt SS mountain · Quill road
Read moreBuild your custom Velocity wheel on DT Swiss hubs for:
Or start from a specific DT Swiss hub (14)
Or pick one of the 15 ready-made pairs below: each opens our custom wheel builder with the Velocity rim and DT Swiss hub already chosen.
Where to start
The Velocity and DT Swiss builds our customers choose most
Gravel and bikepacking
Velocity Cliffhanger wheels on DT Swiss 350 hubs
Our most-built Velocity and DT Swiss pair: Velocity's wide adventure rim on DT's star-ratchet disc hub.
Specs and why it works
The disc Cliffhanger is 25mm inside for 45 to 65mm tires, about 675 grams, stiff under a loaded bike and happy at high spoke tension, in 29, 27.5, 26 and 20 inch.
- Short, stout sidewalls. Velocity keeps the walls low and thick, so a rock or a pothole is less likely to dent the rim or pinch the tube.
- Teeth, not pawls. DT's Ratchet System engages all 36 teeth of two star ratchets at once, and the ratchets can be swapped for 54 SL later for quicker pickup. The end caps and freehub pull off by hand for service.
- 6-bolt or Centerlock. The 350 disc pair is about 164 and 283 grams in 6-bolt, 144 and 259 grams in Centerlock, with end caps for your axle standard.
Mountain
Velocity Blunt SS wheels on DT Swiss 350 hubs
Velocity's cross-country disc rim on DT's 350.
Specs and why it works
The Blunt SS is 26.6mm inside and 30mm outside, 20mm tall, about 420 grams and tubeless-ready: a cross-country and light-trail rim that also suits big-tire gravel.
- Not an enduro rim. For harder riding, the builder offers the wider Blunt 35 on the same hubs.
- Teeth, not pawls. DT's Ratchet System engages all 36 teeth of two star ratchets at once, and the ratchets can be swapped for 54 SL later for quicker pickup. The end caps and freehub pull off by hand for service.
- 6-bolt or Centerlock. The 350 disc pair is about 164 and 283 grams in 6-bolt, 144 and 259 grams in Centerlock, with end caps for your axle standard.
Road
Velocity Quill wheels on DT Swiss 350 hubs
Velocity's wide, welded rim-brake road rim on DT's star-ratchet hub.
Specs and why it works
Velocity says the Quill is 17.2% wider inside, 26.2% stiffer laterally and 99.3% stiffer radially than its A23, on a welded, tubeless-ready section 21mm inside and 25.5mm deep, for tires from 25 to 47mm. The rim-brake 350 is about 149 grams front and 252 grams rear, 5x100 front and 5x130 or 5x135 rear quick release.
- Stiff at lower spoke counts. Velocity says the Quill's width holds lateral stiffness with fewer spokes: 24 hole for a fast road wheel, 32 for brevets and heavier riders.
- Teeth, not pawls. DT's Ratchet System engages all 36 teeth of two star ratchets at once, and the ratchets can be swapped for 54 SL later for quicker pickup. The end caps and freehub pull off by hand for service.
- Tubeless with the right tape. Velocity sets it up with 24mm Velotape; its tolerances are tight, so it needs a low-profile tape and Velocity advises against Veloplugs.
Questions about these builds
Cliffhanger or Blunt SS on a 350?
The Cliffhanger is the loaded-bike rim: 25mm inside, about 675 grams, for bikepacking and touring on 45 to 65mm tires. The Blunt SS is lighter at about 420 grams and 26.6mm inside, for cross-country, light trail and fast big-tire gravel.
DT 350 or White Industries T11 under a Quill?
Both are light, rebuildable rim-brake hubs. The 350 engages with two 36-tooth star ratchets you can upgrade to 54 SL, and its freehub pulls off by hand. The T11 uses three pawls on a 48-tooth ring with a titanium freehub, machined in California. Both build a strong wheel on the Quill.
Road / Time Trial / Tri
Velocity rims on DT Swiss hubs for road, time trial and tri bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the DT Swiss hub our customers choose most with that rim. The builder offers every DT Swiss hub that fits, and you choose the colors, spokes and the rest.
Road / Cross / Gravel
Velocity rims on DT Swiss hubs for road, cross and gravel bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the DT Swiss hub our customers choose most with that rim. The builder offers every DT Swiss hub that fits, and you choose the colors, spokes and the rest.
Mountain Bike
Velocity rims on DT Swiss hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the DT Swiss hub our customers choose most with that rim. The builder offers every DT Swiss hub that fits, and you choose the colors, spokes and the rest.
More about Velocity and DT Swiss wheels
Why the pairing, specs and FAQ
Custom hand built Velocity wheels on DT Swiss hubs
Our order records show more than 180 Velocity wheels laced to DT Swiss hubs since 2009. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What Velocity rims and DT Swiss hubs each bring
- Rolled, drilled and anodized in Grand Rapids, Michigan. Velocity moved all production there in 2016. It buys its extrusion from a supplier in Arizona and does the rolling, drilling and finishing itself.
- Color grown into the metal. Velocity anodizes its rims in house. The process forms a hard oxide layer that is part of the aluminum rather than a coating on top, so Velocity says it won't chip or peel.
- Spoke holes angled for the lacing. Holes are drilled at about 4 degrees and alternate between the left and right flange, so each nipple points closer to where its spoke is headed. The Atlas is the only rim Velocity eyelets.
- Star ratchets instead of pawls. Facing toothed rings take the drive, and all their teeth engage at the same moment. DT Swiss says a pawl has only a small contact area, while the whole face of its ratchet engages, and it credits the smaller point loads for these hubs' reliability.
- Ratchet EXP on the 240 and 180. One ratchet is combined with the threaded ring, leaving fewer parts and less weight. The drive-side bearing moves into that ring too, which widens the bearing spacing, and DT Swiss says this adds 15 percent axle stiffness and longer bearing life.
- The original Ratchet System on the 350. Two conical springs keep both ratchets aligned. DT Swiss calls it marginally heavier than Ratchet EXP, and the hub shell and axle on the current 350 have been reworked to cut weight.
Velocity and DT Swiss custom wheel questions
Which DT Swiss hub fits my Velocity rim?
The cards on this page start on the DT Swiss hub our customers build with each rim most often (DT Swiss 350, DT Swiss 180 Straight Pull Disc, DT Swiss 240 Disc Centerlock). The builder lists every DT Swiss hub that fits your rim, in the drillings and brake types that match.
Do you build Velocity rims on other hubs?
Yes. See our Velocity custom wheel page for every hub that fits each Velocity rim, or our DT Swiss custom wheel page for every rim on a DT Swiss hub.
Can you build with a DT Swiss hub or Velocity rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
There are no products listed under this category.