Skip to main content

Velocity Wheels with Wolf Tooth Hubs

Custom wheel built by ProWheelBuilder: DT 240 Black hubs, Velocity A23 MSW Black rims

Custom Velocity Wheels on Wolf Tooth Hubs

Pick a Velocity rim we carry, put it on a Wolf Tooth hub, and we lace and true the wheel by hand in our Georgia shop.

Why build Velocity rims on Wolf Tooth hubs:

  • Made by specialists: Velocity rims rolled, drilled and anodized in Grand Rapids, Michigan
  • Proven: Velocity rates every rim on a published scale from Featherweight to Strongest; Wolf Tooth drives through ENVE's 42mm INNERDRIVE steel ratchet
  • Built to last: Wolf Tooth sells every hub part separately and sets bearing preload automatically; Velocity anodizes color into the metal, so it won't chip or peel
  • Laced and trued by hand, one wheel at a time, in our Georgia shop
  • In depth below: Major Tom gravel · Cliffhanger mountain · Deep V road
Read more

Build your custom Velocity wheel on Wolf Tooth hubs for:

Or start from a specific Wolf Tooth hub (2)

Or pick one of the 12 ready-made pairs below: each opens our custom wheel builder with the Velocity rim and Wolf Tooth hub already chosen.

Where to start

The Velocity and Wolf Tooth builds our customers choose most

Gravel

Velocity Major Tom wheels on Wolf Tooth Road Gravel Straight Pull hubs

Our gravel pick from the Velocity and Wolf Tooth parts we build with. The Velocity Major Tom is an aluminum rim, 23mm inside, 21mm deep, about 465 grams in 700c, sized for about 35 to 50mm tires.

Specs and why it works

We lace it to Wolf Tooth Road Gravel Straight Pull hubs in 24 hole.

  • Tubeless only where it is designed in. Rims listed as tubeless ready have tight tolerances at the bead and call for thin Velotape. Velocity says any rim not listed that way must run tubes, so check the model before you pick a tire setup.
  • Straight-pull drilling made for the spoke. On the road and gravel hubs, the spoke holes are shaped to stop straight-pull spokes from twisting and to keep them from touching. Wolf Tooth also keeps spoke lengths consistent across a wheelset, which simplifies carrying a spare.

Mountain

Velocity Cliffhanger wheels on Wolf Tooth Mountain hubs

Our mountain pick from the Velocity and Wolf Tooth parts we build with. The Velocity Cliffhanger is a hooked aluminum rim, 25mm inside, 21.6mm deep, about 675 grams in 29 inch, sized for about 2.1 to 2.4 inch tires.

Specs and why it works

We lace it to Wolf Tooth Mountain hubs in 28 hole.

  • Spoke holes angled for the lacing. Holes are drilled at about 4 degrees and alternate between the left and right flange, so each nipple points closer to where its spoke is headed. The Atlas is the only rim Velocity eyelets.
  • Engagement you can change. Wolf Tooth sells drive rings with 60, 80 and 100 teeth, which work out to 6, 4.5 and 3.6 degrees of travel before the hub picks up. Fewer teeth favor lower drag, more teeth favor quicker pickup, and the rings swap without special tools.

Road

Velocity Deep V wheels on Wolf Tooth Road Gravel Straight Pull hubs

Our road pick from the Velocity and Wolf Tooth parts we build with. The Velocity Deep V is a hooked aluminum rim, 14mm inside, 30mm deep, about 580 grams in 700c, sized for about 23 to 28mm tires.

Specs and why it works

We lace it to Wolf Tooth Road Gravel Straight Pull hubs in 24 hole.

  • A published chart of sizes and strength. Velocity's model matrix runs from 16 inch to 32 inch and rates each rim from Featherweight to Strongest with an optimal tire width, which makes rims easy to compare. The builder shows which sizes we offer for each rim.
  • A low-drag 40T ring for road and gravel. Only the road and gravel hubs take the 40T PRO ring, at 9 degrees. Wolf Tooth reduces its diameter, mills out more material and fits a lighter spring to cut ratchet drag and weight.

Questions about these builds

Which Velocity rim should I build on Wolf Tooth hubs?

For gravel, the Major Tom (23mm inside) on Wolf Tooth Road Gravel Straight Pull hubs; for mountain, the Cliffhanger (25mm inside) on Wolf Tooth Mountain hubs; for road, the Deep V (14mm inside) on Wolf Tooth Road Gravel Straight Pull hubs. Each one opens the builder from its section above, and the cards below cover every Velocity rim that fits a Wolf Tooth hub.

Road / Cross / Gravel

Velocity rims on Wolf Tooth hubs for road, cross and gravel bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Wolf Tooth hub our customers choose most with that rim. The builder offers every Wolf Tooth hub that fits, and you choose the colors, spokes and the rest.

Mountain Bike

Velocity rims on Wolf Tooth hubs for mountain bikes

Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Wolf Tooth hub our customers choose most with that rim. The builder offers every Wolf Tooth hub that fits, and you choose the colors, spokes and the rest.

More about Velocity and Wolf Tooth wheels

Why the pairing, specs and FAQ

Custom hand built Velocity wheels on Wolf Tooth hubs

Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.

What Velocity rims and Wolf Tooth hubs each bring

  • Rolled, drilled and anodized in Grand Rapids, Michigan. Velocity moved all production there in 2016. It buys its extrusion from a supplier in Arizona and does the rolling, drilling and finishing itself.
  • Color grown into the metal. Velocity anodizes its rims in house. The process forms a hard oxide layer that is part of the aluminum rather than a coating on top, so Velocity says it won't chip or peel.
  • Spoke holes angled for the lacing. Holes are drilled at about 4 degrees and alternate between the left and right flange, so each nipple points closer to where its spoke is headed. The Atlas is the only rim Velocity eyelets.
  • A 42mm steel ratchet. Wolf Tooth tried several drive systems and settled on ENVE's INNERDRIVE. It says the large ring diameter lowers the stress on each tooth, so the hub can run more teeth without giving up durability.
  • Engagement you can change. Wolf Tooth sells drive rings with 60, 80 and 100 teeth, which work out to 6, 4.5 and 3.6 degrees of travel before the hub picks up. Fewer teeth favor lower drag, more teeth favor quicker pickup, and the rings swap without special tools.
  • A low-drag 40T ring for road and gravel. Only the road and gravel hubs take the 40T PRO ring, at 9 degrees. Wolf Tooth reduces its diameter, mills out more material and fits a lighter spring to cut ratchet drag and weight.

Velocity and Wolf Tooth custom wheel questions

Which Wolf Tooth hub fits my Velocity rim?

The cards on this page start on the Wolf Tooth hub our customers build with each rim most often (Wolf Tooth Road Gravel Straight Pull, Wolf Tooth Mountain). The builder lists every Wolf Tooth hub that fits your rim, in the drillings and brake types that match.

Do you build Velocity rims on other hubs?

Yes. See our Velocity custom wheel page for every hub that fits each Velocity rim, or our Wolf Tooth custom wheel page for every rim on a Wolf Tooth hub.

Can you build with a Wolf Tooth hub or Velocity rim I already own?

Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.

How long will my wheel take?

Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.

Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.

Not sure which rim or hub?

Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.

Open the Build Assistant →

There are no products listed under this category.