There are no products listed under this category.
WTB Wheels with Velo Orange Hubs



Custom WTB Wheels on Velo Orange Hubs
Pick a WTB rim we carry, put it on a Velo Orange hub, and we lace and true the wheel by hand in our Georgia shop.
Why build WTB rims on Velo Orange hubs:
- Proven: WTB designs its rims and tires together for an easy, reliable tubeless seal
- Built to last: Velo Orange Chronos rears come apart with no tools, so a broken spoke on tour does not end the trip
- Laced and trued by hand, one wheel at a time, in our Georgia shop
- In depth below: KOM Tough TCS 2.0 CVX I 25 gravel · KOM Tough TCS 2.0 CVX I 35 mountain
Build your custom WTB wheel on Velo Orange hubs for:
Or start from the Velo Orange hub you want:
Or pick one of the 7 ready-made pairs below: each opens our custom wheel builder with the WTB rim and Velo Orange hub already chosen.
Gravel in depth
WTB KOM Tough TCS 2.0 CVX I 25 wheels on Velo Orange Chronos Disc hubs
Our gravel pick from the WTB and Velo Orange parts we build with. The WTB KOM Tough TCS 2.0 CVX I 25 is a hooked aluminum rim, 25mm inside, 17.6mm deep, about 485 grams in 700c, sized for about 35 to 50mm tires. We lace it to Velo Orange Chronos Disc hubs in 32 hole.
- Solid Strip in TCS 2.0. A strip sits in a recessed channel under the tubeless tape, which stops the tape sagging at the spoke holes. The tire then seals against a smooth, consistent surface.
- A ratchet in place of pawls. Chronos rears use a floating ratchet, which Velo Orange says gives good engagement and handles high torque loads. A 36-tooth ratchet is stock, and Velo Orange sells a 54-tooth replacement for more engagement on technical off-road riding.
Start building this pair:
Mountain in depth
WTB KOM Tough TCS 2.0 CVX I 35 wheels on Velo Orange Chronos Disc hubs
Our mountain pick from the WTB and Velo Orange parts we build with. The WTB KOM Tough TCS 2.0 CVX I 35 is a hooked aluminum rim, 35mm inside, 17.6mm deep, about 577 grams in 29 inch, sized for about 2.4 to 2.8 inch tires. We lace it to Velo Orange Chronos Disc hubs in 32 hole.
- I-Beam support. An I-shaped wall inside the rim cavity adds radial and lateral rigidity, and KOM Tough rims use two of them. HTZ rims pair the I-Beam with walls WTB says are 25 to 30 percent thicker than its standard rims, for the extra weight of e-bikes.
- Service with no tools. On the Chronos rears the end caps and freehub body come off by hand, so a broken drive side spoke on a long tour does not have to end the trip.
Start building this pair:
Questions about these builds
Which WTB rim should I build on Velo Orange hubs?
For gravel, the KOM Tough TCS 2.0 CVX I 25 (25mm inside) on Velo Orange Chronos Disc hubs; for mountain, the KOM Tough TCS 2.0 CVX I 35 (35mm inside) on Velo Orange Chronos Disc hubs. Each one opens the builder from its section above, and the cards below cover every WTB rim that fits a Velo Orange hub.
Road / Cross / Gravel
WTB rims on Velo Orange hubs for road, cross and gravel bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Velo Orange hub our customers choose most with that rim. The builder offers every Velo Orange hub that fits, and you choose the colors, spokes and the rest.
WTB KOM Tough TCS 2.0 CVX I 25 on Velo Orange Chronos Disc25mm inside · 17.6mm deep · 32 hole · hookedStart building this pair →
WTB KOM Light TCS I 23 on Velo Orange Chronos Disc23mm inside · 17.75mm deep · 32 hole · hookedStart building this pair →
WTB KOM Light TCS 2.0 CVX I 25 on Velo Orange Chronos Disc25mm inside · 17.75mm deep · 28 hole · hookedStart building this pair →
Mountain Bike
WTB rims on Velo Orange hubs for mountain bikes
Each card opens our custom wheel builder with the rims and hubs for a wheelset already picked, on the Velo Orange hub our customers choose most with that rim. The builder offers every Velo Orange hub that fits, and you choose the colors, spokes and the rest.
WTB KOM Tough TCS 2.0 CVX I 35 on Velo Orange Chronos Disc35mm inside · 17.6mm deep · 32 hole · hookedStart building this pair →
WTB KOM Tough TCS 2.0 CVX I 40 on Velo Orange Chronos Disc40mm inside · 17.6mm deep · 32 hole · hookedStart building this pair →
WTB KOM Tough TCS 2.0 CVX I 30 on Velo Orange Chronos Disc30mm inside · 18.1mm deep · 32 hole · hookedStart building this pair →
WTB KOM Light TCS 2.0 CVX I 30 on Velo Orange Chronos Disc30mm inside · 17.75mm deep · 32 hole · hookedStart building this pair →More about WTB and Velo Orange wheels
Why the pairing, specs and FAQ
Custom hand built WTB wheels on Velo Orange hubs
Every pair on this page is in our builder today, with a rim and hub that fit each other. We lace each wheel by hand in our Georgia shop: tensioned evenly, trued flat and round, and stress-relieved before it ships. Spoke lengths are calculated from the measured dimensions of your exact rim and hub.
What WTB rims and Velo Orange hubs each bring
- Rims and tires designed together. WTB develops the two at the same time to optimize how they fit, aiming for easier mounting and removal and a more reliable tubeless seal. It also names rims by inner width, so an i30 is 30mm inside and tire fit is easy to work out.
- Solid Strip in TCS 2.0. A strip sits in a recessed channel under the tubeless tape, which stops the tape sagging at the spoke holes. The tire then seals against a smooth, consistent surface.
- 4D angled drilling. Each spoke hole is drilled at the angle that lines the nipple up with its hole in the hub. WTB says that eliminates binding and side loading and spreads the load, which extends the life of the wheel.
- A ratchet in place of pawls. Chronos rears use a floating ratchet, which Velo Orange says gives good engagement and handles high torque loads. A 36-tooth ratchet is stock, and Velo Orange sells a 54-tooth replacement for more engagement on technical off-road riding.
- Service with no tools. On the Chronos rears the end caps and freehub body come off by hand, so a broken drive side spoke on a long tour does not have to end the trip.
- High flanges that make room for big bearings. The 58mm flanges leave space for large sealed cartridge bearings. Velo Orange chose this layout for long tours and commuting through grit and rain.
WTB and Velo Orange custom wheel questions
Which Velo Orange hub fits my WTB rim?
The cards on this page start on the Velo Orange hub our customers build with each rim most often (Velo Orange Chronos Disc). The builder lists every Velo Orange hub that fits your rim, in the drillings and brake types that match.
Do you build WTB rims on other hubs?
Yes. See our WTB custom wheel page for every hub that fits each WTB rim, or our Velo Orange custom wheel page for every rim on a Velo Orange hub.
Can you build with a Velo Orange hub or WTB rim I already own?
Yes. Choose the supply-your-own option in the configurator, ship it to us, and we will lace it into a new wheel with new spokes cut to the right length. You pay for the parts you need and the build labor.
How long will my wheel take?
Build time comes down to parts availability rather than bench time. Your estimated ship date is shown in the configurator before you check out, so you know the date before you pay.
Not sure what to pick? Email info@prowheelbuilder.com (fastest) or leave a voicemail on 470-253-0929. You will be talking to the people who build the wheels.
Not sure which rim or hub?
Tell the Build Assistant how you ride and what you want to spend, and it ranks complete builds for you.
Open the Build Assistant →